Question about Samsung Monitors&Printers x22 ppm Mono Laser Printer

1 Answer

Samsung x22 notebook

The cd drive does not read any cd,the green light on the side of the cd slot flashes a few times but the cd is soon ejected with a message being displayed which reads "INSERT DISC IN DRIVE E" PLEASE HELP!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Samsung Expert
  • 113 Answers
Re: samsung x22 notebook


Have you tried to use a CD clener to clean the CD lens?

have you tried to restart you notebook and check it works after that.

if both ans is yes. it might be the lens is faulty that require to replace the CD-Rom Drive.

hope this help :)

Samsu Tech

Posted on Apr 17, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Epson Stylus PHOTO R220 red lights keep flashing

I hope this will help you :)
* Green Power light flashes- The printer is receiving a print job, replacing an ink cartridge, charging ink, or cleaning the print head.
* RED paper light is On- If the CD/DVD try guide is open, close the CD/DVD tray guide, load paper, then press the paper button. Your paper ran out or multiple sheets loaded at the same time . Load paper and press the paper butoon to resume printing.
* RED paper light flashes- Paper is jammed in the printer. Press the paper button to eject the jammed paper. If the light is still flashing , open the cover and remove all paper, including any jammed or torn pieces. Then reload paper and press the paper button to continue printing.
* RED Ink Light Flashes - One or more cartridges are low on ink. Check the message that appears on your screen to determine which cartridge is low, or follow the instructions in " Checking the Ink Supply". Make sure you have a replacement cartridge.
* RED Ink Light is ON- One or more cartridges are out of ink or not installed. If you have just installed a new cartridge, it may be incomaptible with the printer or incorrectly installed. Reinstall it or replace it with the correct cartridge
* RED Ink and RED paper lights flash alternately- The CD/DVD tray guide was left open when you turned on the printer or when printing on paper. Just simply close it/
* Green Power Light is Off; RED paperand RED Ink Lights flashing- Paper may be blocking movement of the print head. Turn off the printer, then open the cover and remove any jammed paper or other foreign objects. Turn the printer back on again. Or it may have an internal error. Turn off the printer, wait a few seconds, then turn it on again.

Jul 06, 2011 | Epson Stylus Photo R220 InkJet Printer

2 Answers

Alternate green and orange lights flashing, tried to remove battery pack and left off for half hour, still problem, if i hold green button down orange light blinks 15 times which i saw in the manual to...

Hi I have a ip100 portable printer and both green and orange lights flash. Green flashes twice and the orange light flash at what seems to be a random disorder.

May 17, 2011 | Canon iP100 Portable Printer

1 Answer

Flashing lights on printer

The iP4300 manual says this for 10 flashes "
The size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A4, Letter, A5, and 5" x 7". Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed." Hope this helps

Mar 08, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

2 Answers

Sd slot used to read cards, now "memory card error"

i am trying to copy my photos from my 4 GB SD memory card on to my computer through my printer HP PSC 2355 all in one printer. But as soon as i put the card into the slot it turns green and the a couple of minutes later turn Red and flashes and i cannot read it on my computer

Dec 04, 2009 | HP Printers & Copiers

2 Answers

My samsung ML2010 printer has Error button flashing green

your printer is not inisilize properly. it is a logic card pls you can repaired it from printer vendor.

Sep 02, 2009 | Samsung ML 2010 Laser Printer

1 Answer

Made a mistake buying this printer!!

First off, How many times does it flash organge before it goes to green?

two: out of paper
three: paper jam
four: Ink has run out
Five: FINE cartridge cannot be found
Seven: FINE Cart. not installed in correct position
Eight: Ink absorber almost full

Count how many times it flashes. Then get back to me.
Make sure the little tab for the paper size is all the way to the right. also check the printer settings on your computer to make sure the paper size is the size you want. IE:letter. Also make sure the inks are in their correct positions.Black on the right hand side and color on the left. Also check to see if there is anything stuck inside the printer that could jam the paper.

Feb 15, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Not printing from one computer

If the CHARGE/ERROR light is remain on orange with beep 1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly.
If the POWER light is flashing green, that mean your print job is not finish yet.

YBC (/\)

Dec 15, 2008 | Canon BJC 55 InkJet Printer

1 Answer

BJC55 Printer not printing

There are some possibilities due to the above phenomena. Let's discuss about it:
1) If the POWER light is flashing green, then your printer is now warming up or performing maintenance procedure (replacing cartridge/tank) or cleaning print head, just wait a few seconds till the light stop flash. Also if the last page of a print job not done, this POWER light flashing green.
2) If the CHARGE/ERROR light is flashing orange with beep 3 times, it mean your cartridge need to be install (especially the 1st time turn on printer) or cartridge being replaced, just install the cartridge and press RESUME to continue.
3) If both POWER light is flashing green and CHARGE/ERROR light is flashing orange with beep 3 times, then your printer may facing a very serious error and maybe need a replacement.

Hope these help.

YBC (/\)

Nov 01, 2008 | Canon BJC 55 InkJet Printer

4 Answers

Zebra 2824 red light

Hold the feed button while turning on the printer. After a config label prints, turn the printer off and then on again, and try printing again.

Also, make sure the lid is closed far enough to engage the lid sensor. If the red light comes on again, press down a bit on the lid, hit the feed button and try to print again.

Sep 03, 2008 | Zebra TLP 2844-Z Thermal Label Printer

3 Answers

Printer Problem

This was not the sollution for my pinter..
My Magneta is half full and my error led is also blinking 15 times

I found this service manual for the IP4200 but this methode also doen not solve my error led..

Is their someone who has the sollution for this strange error?

1) With the printer power turned off, while pressing

the Resume/Cancel button, press and hold the Power
button. (DO NOT release the buttons. The Power LED
lights in green to indicate that a function is
2) While holding the Power button, release the
resume/Cancel button. (DO NOT release the Power
3) While holding the Power button, press the
Resume/Cancel button 2 times, and then release both

the Power and Resume/Cancel buttons. (Each time the

Resume/Cancel button is pressed, the Alarm and
LEDs light alternately, Alarm in orange and Power
green, starting with Alarm LED.)
4) When the Power LED lights in green, press the
Resume/Cancel button the specified number of

Time(s) LED indication Function Remarks
0 times Green (Power) Power off When the print head is

not installed, the carriage returns and locks in the

home position capped.
1 time Orange (Alarm) Service test print .
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization

>>>>>>>>THIS ONE
4 times Green (Power) Waste ink counter resetting<<<<<<<<<<<<

5 times Orange (Alarm) Destination settings After
entering the destination settings mode, press the
Resume/Cancel button the specified number of time(s)

to select the destination. For detail, see
"Destination settings procedures" below.
6 times Green (Power) Print head deep cleaning
(Cleaning of both black and color)
7 times Orange (Alarm) Reserved
8 times Green (Power) CD / DVD check pattern
9 times Orange (Alarm) CD / DVD print position
correction (horizontal: X direction)
10 times Green (Power) CD / DVD print position
correction (vertical: Y direction)
11 to 13 times Orange, Green, Orange(Alarm,
Power,Alarm) Return to the menu selection
14 times Green (Power) Left margin correction Not used

in servicing.
15 times Orange (Alarm) Return to the menu selection

Time(s) LED indication Destination CD / DVD print
0 times Green (Power) No change of the destination
1 time Orange (Alarm) Japan Supported
2 times Green (Power) Korea Not supported
3 times Orange (Alarm) US Not supported
4 times Green (Power) Europe Supported
5 times Orange (Alarm) Australia Supported

Oct 30, 2007 | Canon PIXMA iP4300 InkJet Photo Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

166 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides