To enter the menu of your device follow the following directions :
Your device default IP is 192.168.0.50 - Connect the device to your computer with an ethernet cable and set up your computer IP address manually, make it 192.168.0.49 , subnet 255.255.255.0 When connection is established, enter 192.168.0.50 in your internet browser, you will be able to reach the console.
Was this helpful?
Yes
No
Popular Solutions for D-Link AirPlus Xtreme G
D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access...
Hi all. I have Thomson TG 585 Wireless Router (802.11g) connected to ADSL, and want to extend the...
(More)
Hi all. I have Thomson TG 585 Wireless Router (802.11g) connected to ADSL, and want to extend the signal by using D-Link DWL-2100AP AirPlusXtremeG. The question is: how can I manage that, and which mode should I use; the AP Repeater or the Access Point, and how? any solution or suggestion is highly appreciated.
Help me -------------------------------------------------------------------------------- I use two...
(More)
Help me -------------------------------------------------------------------------------- I use two Wireless Access point D-Link DWL-3200 point to point mode with WDS with AP. Now it ok. I wnat to get one wireless from DWL-3200. Now I buy DWL-2100AP, Which mode shall i use to get from DWL-3200 to DWL-2100? Please help me.
two dwl2100, one as ap, one as repeater,(ant 14dbi) connecting a dwl 3200 ap via switch with an 18db...
(More)
two dwl2100, one as ap, one as repeater,(ant 14dbi) connecting a dwl 3200 ap via switch with an 18db omnidirectional antenna, connecting new dwl 2100 to that antenna again as repeaters, the last three times didn't work well. device could only connect if the connecting comp is not configured as dhcp...on an other location even with static ip the device tends to shut down automatically and restarts direct after...any idea? i am located in costa rica... developing a wireless network for residential area... thanx nis