Question about iLO 3200 32 in. LCD Television

2 Answers

Cable in connection

Our cable wire coming from outside is a different connection than the "antenna in" socket on the ilo 32HD. Is there a special connector for it? Where would I get it? Thanks.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can go to Radio shack and buy a female coaxial to male RCA adapter it screw right on to the cable then you can plug it into the TV.

Posted on Feb 22, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Most TV models/cable providers uses the F type of coaxial connector as shown below. cable in connection - 7c21c7e.jpg
However, some versions intended for other regions (Europe & Middle East) uses the PAL type of connector likewise shown below.
be2f30d.jpg
If your model uses the latter and your cable provider uses the F type, what you need is a straight F type Female to PAL Male adapter. Or it could even be just the other way around.
f66d800.jpg
They are available in most electronic parts/supply store or online. You can try here, here or here.

Hope that this be of idea/help. Pls post back how things turned up, r should you need additional information and/or if your cable connectors are of different types. A photo of the connectors would be nice.

Good luck and kind regards.

Posted on Jan 06, 2008

  • Louie  Role
    Louie Role Jan 06, 2008

    Hi again,

    the links did not get posted.

    ...You can try here, here or here...

    Cheers.

  • Louie  Role
    Louie Role Jan 14, 2008

    Hi again,

    Appreciate the rating and glad to be of assistance.

    Cheers.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is no signal but if I move lead in aerial socket the signal comes back for a second but goes when stop pushing it up. It seems there is an issue with the aerial input on the tv as I have tried a...


It's either a bad antenna cable (most likely), or the F-connector socket is broken or has come un-soldered inside the se (possible)t. First, try exchanging your antenna cable with a new one. They're inexpensive and tend to fail over time anyway. If that doesn't solve the problem, a technician will be needed to repair or replace the F-connector (the screw-on connecter where the antenna connection screws in on the back of the set). If you're good with a soldering pen and have a nearby electronics store where you can buy a new F-connector socket, you may be able to do it yourself, as it's a very simple repair. If you do not have the skill to make the repair, don't fear, it shouldn't be very costly to accomplish.

Jul 02, 2011 | Televison & Video

1 Answer

How do I install the power antenna? I have a replacement, and the wiring is there, but I don't see how to mount the part.


PLEASE DON'T FORGET TO RATE!!!!

Removal & Installation
  1. Lower the antenna and remove the luggage compartment trim panel.
  2. Disconnect the lead-in cable from the antenna and ground strap.
  3. Disconnect the antenna motor wires at the connectors and disconnect the control box connectors.
  4. Remove the top mounting nut and stanchion assembly.
  5. Remove the two nuts retaining the antenna bracket assembly to the quarter panel.
  6. Remove the antenna assembly from the vehicle.
8617042.gif
Some antennas require a special socket to remove the locknut

6210b68.gif
Once its loose the nut can be removed by hand. Sometimes it can be twisted off with a needle nose pliers, but that usually ruins the tool

afa5165.gif
The antenna mounts in the luggage compartment against the support member

abce961.gif
The motor and housing sit on a stand that is bolted to the support member

0ee099b.gif
Unplug the antenna lead from the staff tube

9b0f741.gif
Unplug the connector to the motor

fb68086.gif
Unplug the connector to the relay

d275fd1.gif
Its easier to remove the antennae from the support to gain access to the ground strap screws

To install:
NOTE Correct sequencing for installation is important to prevent water leakage or dimpling of the quarter panel

  1. Connect the antenna cable, power connector and control box connector.
  2. Insert the antenna mast through the quarter panel hole and position bracket on mounting studs in the luggage compartment.
  3. Install the stanchion assembly.
  4. Loosely install the two bracket retaining nuts.
  5. Install the top-mounting nut.
  6. Tighten the bracket retaining nuts.
  7. Install the ground strap.

Nov 19, 2009 | 1990 Lincoln Continental

1 Answer

In ANT connector broke off


If you have cablebox, use RCA cable(composit) or componentcable to hook up. you will see better picture than repairing connector back on.

Mar 25, 2009 | iLO 3200 32 in. LCD Television

1 Answer

Ilo 32HD NO Channels! buzzing noise


the input setting may need changed on your tv

Dec 09, 2008 | iLO 3200 32 in. LCD Television

2 Answers

How to connect kenwood radio to Toyota antenna relay


Most aftermarket car stereos have a blue wire for power antenna control. Connect the blue wire to your car's power antenna control wire. Also, Crutchfield has nocut connector kits to install most car stereos in most cars, with instructions. You can either buy these kits or Crutchfield gives them to you, free, when you buy a stereo from them.

Jul 16, 2008 | Toyota Supra Cars & Trucks

1 Answer

Antenna problem


That model requires a HD cable box from your cable company. It does not have an atsc tuner in it. That's why they are lower in price.

Apr 17, 2008 | iLO 3200 32 in. LCD Television

1 Answer

Lcd tv black but green power light on


If you're using a cable box , connect box to tv using component cable .

Jan 04, 2008 | iLO 3200 32 in. LCD Television

1 Answer

I have an ilo 32hd


Unfortunately the ILO TVs aren't a good investment. If you just purchased the television, I would return it as soon as possible and purchase a more reliable and well known brand. ILO support services is almost non-existant and there are several comments on other blogs regarding the Ilo brand. I have two ILO 26" HD, which I purchased in Aug '06 and am now beginning to experience problems.

Dec 29, 2007 | iLO 2600 Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Saylor

Level 1 Expert

5 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...