Expert
(866) 800-3823
When it comes to air conditioning systems,...
Answer
I am installing a used heat pump into my exsisting gas furnace. All have left to do before charging...
(More)
Problem for Ruud UBHC Air Conditioner
Hi ,
By jamesclement on Nov 08, 2009
Hi ,
I have a Electronic pilot lighting system on my RUUD package unit. The pilot light flame keeps blowing out or is not working properly. I removed the panel to look and see what was wrong. I could not see any faults. The sparker worked just fine, the gas line tubing was fine no blockages( took it off to inspect it) every thing looked good. Worked fine for the last couple of weeks and now it will not ignite the pilot light to light the rest of the propane gas to heat the house. I tested the flame sensor using a mach it worked fine the sensor stopped the sparker and when I removed the mach the sparker started again. Gas value on the module works manually when you push in the switch, all fans work. I am at my wits end not sure what else to try.
Any help would be welcomed.
James Clements
I have a Electronic pilot lighting system on my RUUD package unit. The pilot light flame keeps blowing out or is not working properly. I removed the panel to look and see what was wrong. I could not see any faults. The sparker worked just fine, the gas line tubing was fine no blockages( took it off to inspect it) every thing looked good. Worked fine for the last couple of weeks and now it will not ignite the pilot light to light the rest of the propane gas to heat the house. I tested the flame sensor using a mach it worked fine the sensor stopped the sparker and when I removed the mach the sparker started again. Gas value on the module works manually when you push in the switch, all fans work. I am at my wits end not sure what else to try.
Any help would be welcomed.
James Clements
Solution #1
posted on Nov 08, 2009
Sounds like you have checked most things. A pilot will go out if it is dirty, if the gas valve is not holding or if the senser is dirty or bad. Remove the pilot and clean out the small orifice inside. Check all electrical connections, clean the sensor, and make sure the gas valve holds 24 volts on the PV side.
Yes
No
Popular Solutions for Ruud UBHC Air Conditioner
Questions and Unsolved Problems for Ruud UBHC Air Conditioner
Do you recommend Ruud UBHC Air Conditioner?
Answer
Answer
I have a similar problem. It gets up to 78 degrees in the house and the ac unit is set to 65. It...
(More)
Answer
Hello.. slight problem. Rudd silouette II a/c gas furnace. Fan runs on low speed, and will not shut...
(More)
Answer
I have messg error 6 waht mining my air condtion Ruud
Answer
I have a ruud ac unit running heat for the second time this winter and now not heating. blowing cool...
(More)
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Ruud UBHC Air Conditioner:
Top Air Conditioner Experts
Experience:
installed and repaired audio/video equipment for over 23 years at 2 colleges and 3 businesses.
Ask Me
Top Air Conditioner Repair
Best Air Conditioners
Recommended by Owners
Recommended by Owners
