I used a cx3200 printer for about 4 years with good results but haven't used it for 6 months because...
(More)
I used a cx3200 printer for about 4 years with good results but haven't used it for 6 months because it flashes the red error button when turned on. I bought a new printer but it couldn't be hooked up to my old Windows XP which I'm still using. I now have a new Epson Workforce 500 but remains unused; bought a new system w Windows Vista but returned it; have been looking for a new! Epn. cx3200 but couldn't find one and would love to somehow get a new or my old printer to work again like before. Would appreciate your suggestion. Bong, S. Francisco, CA. I prefer continuing using my old desktop because of built-in softwares and datafiles on it. I also prefer the Epson Stylus CX3200 printer because I only have to load 2 ink cartridges and the compatible ones are cheap and workable (I used them for 4 years!) The last time the red light came on when I ran a head cleaning check and the pop-up panel had this familiar message, "Parts in your printer have run out of their service lives. Consult..." I'm willing to pay one of your gurus a reasonable charge if s/he can fix my problem for me, thanks.
When we power up the printer it starts normally checking and then makes a horrible noise similar to...
(More)
When we power up the printer it starts normally checking and then makes a horrible noise similar to microphone feedback noise. Error light comes on and error light is on
My printer - Epson CX3200 don`t know red coulour and the printing quality is really bad, i have...
(More)
My printer - Epson CX3200 don`t know red coulour and the printing quality is really bad, i have tried to clean head, but it just eat my cartridge, i have changed it about 4 times.. Lil bit before it showed that i must clean paper jam, i cleand and now it don`t mix the red colour... Blue it mix, Green too but red don`t mix...
on my Epson Stylus DX7450 printer ,underneath the stop button is 2 wee lights 1 with a page beside...
(More)
on my Epson Stylus DX7450 printer ,underneath the stop button is 2 wee lights 1 with a page beside it and the other with a drop(like an ink drop) beside it.Its an orange light that its on on the 2nd one(the 1 that looks like an ink drop) what is the prob and how can I fix it please..Ive tried numerous things ,but without luck.