how do I split the cover on a samsung 712 monitor. Screws are out. Where do I put the large screw...
(More)
how do I split the cover on a samsung 712 monitor. Screws are out. Where do I put the large screw driver and pry?
I have a balance digital technology monitor model # Cm2017 and i need a power cord for it and do not...
(More)
I have a balance digital technology monitor model # Cm2017 and i need a power cord for it and do not know where to get a cord for it
I have a viewsonice VX724 LCD monitor and the contrast menu keep popping up, set itself to 0 and...
(More)
I have a viewsonice VX724 LCD monitor and the contrast menu keep popping up, set itself to 0 and stay open. There's no driver for my product and i've already tried the VX715 drivers which is a previous version of the same monitor. I have also turn off the monitor multiple times without any result. If a hold the "up arrow" the contrast goes back to what i had it set to but few sec after it goes back down to 0. The only way i can close the menu is if i hold "1"(exit/menu) + "up arrow" , which set the contrast then close the menu and then pop a message saying "White Balance" but few sec after it goes down again. Sound like i'll have to ask for a RMA but any other solution would gladly be welcome. Thank you.
I have removed the base and the four screws around the sides but the rear cover does not come off...
(More)
I have removed the base and the four screws around the sides but the rear cover does not come off easily. I am afraid to force it, so there must be a trick or a hidden fastener. Also what about those two pins that connect the monitor to the base, do they need to be removed? Any help would be greatly appreciated.