Problem with colors, all is fine except when I take picture of gemstones with pink or pink tints they all come out blue or blue purple? I purchased and have tried a light box, with and without flash, various lights with and without the light box,but no results I work with jewelry , and need true colors, but I'm not even close with the pinks?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Morganite Quality Factors
www.gia.edu/morganite-quality-factorsMorganite Quality Factors. ... peach-colored material more highly than heat-treated pink stones. ... an easy way to describe this pastel orange-pink morganite.
Morganite - Gemstone
Women the world over love morganite for its fine pink tones ... name of morganite for less than a ... the more transparent, the more valuable' only ...
Beryl - Wikipedia, the free encyclopedia
The term was later adopted for the mineral beryl more ... Emerald is a rare and valuable gemstone and, ... Morganite, also known as "pink beryl", "rose ...
Purple Panasonic PC>TV Problem:
The VGA cable uses three primary color RGB channels.
Red, Green, and Blue.
The picture is made up of pixels or dots arranged in a grid along the "X" horizontal axis and "Y" vertical axis.
The computer mixes the intensity of each color channel to create a unique color per pixel.
All RGB at 100% creates white.
R+G creates yellow.
R+B creates magenta, ie purplish.
G+B creates cyan.
So a purplish tint sounds as if your Green wire has no signal, which may indicate a faulty VGA cable or VGA socket.
Put another way, (R+G+B)-G=R+B=magenta.
So try another VGA cable, spray all socket pins with "Servisol " or similar contact cleaner.
All 0%=Black; All 50%=Grey; All 100%=White.
You're either using old/expired film, or taking photos during dusk. Color film is balanced for daylight photography. Using it under conditions other than that will result in varying color casts on the resulting images.
Fluorescent lighting: Greenish
Indoor bulbs: Reddish/orange
Outdoor at night/dusk: Blueish/purpla
Ourdoor at dawn: Pink/blue
Or, you may have just gotten bad print work done. Try a different lab.
This problems,u have is not the projection lamp problems.The problems,u have it known as convergence problems,it dead.The colors lines R,G,B mis alignment,picture have colors shadows,pictures look like a 3D pics.The Toshiba DLP tvs have a board call a HYPER board,that the Toshiba tvs convergence board.The (HYPER-BOARD)the tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the HYPER-BOARD known as a convergence board,must be replaced to solved the tv pictures convergence problems.The shop,will cost u $300-350 for parts and labors.
From your description, it sounds like a problem with the blue color. Green LCD=purple onscreen, Red=cyan(baby blue) onscreen, Blue LCD=yellow onscreen. It could be a lot of dust on the blue lcd panel, or worse, might be a burned polarizer filter behind the lcd panel due to excessive heat. If you can focus on the yellow and its tons of yellow specs, its dust. A burned filter however, must be replaced. A technician trained in projectors will have to do it. The filter material is glued to a thin glass panel and is replaced as a single filter. It's a very involved repair.