Question about Kenmore 22422 Top Load Washer

1 Answer

Kenmore 110.92195110 Loud clicking noise only during the spin cycle. Unit won't spin but problem during the wash cycle..agitate fine. Took unit apart and the coupling units between motor and transmission (the two opposite plastic pieces that lock into the black coupler piece) look fine (not worn out). There does seem to be a plastic piece between the Brake and Drive tube and the Gearcase (the clutch assembly) that appears to be worn out. My parts book diagram that came with the unit doesn't show the piece that is actually installed in the unit. There is something called a Wahser, Spin Tube Thrust (ring) shown, but the piece in the unit doesn't look like what is shown...what is in the unit has plastic leg-like pieces not round and flat. Again, the unit only clicks during the spin cycle and doesn't spin.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: kenmore 110.92195110

Those parts come as a complete kit. order a brake assembly.

Posted on Jan 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?

How To Fix A Washing Machine Making Noise During The ...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

Dec 03, 2015 | Washing Machines

1 Answer

Know when clutch going bad

Needs agitator dogs in agitator.

Mar 13, 2014 | Whirlpool Washing Machines

1 Answer

Kenmore washing machine won't agitate?

You are referring to the "agitator dogs". Does the unit run during the wash cycle put the agitator does not move?

Nov 24, 2012 | Kenmore Washing Machines

1 Answer

Kenmore 90 plus series washer won't spin, barely agitates, will drain - but makes loud noise

It sounds like the transmission is done. Can't pinpoint what it is exactly, but I would start there.

Aug 21, 2012 | Kenmore Washing Machines

2 Answers

Washer won't agitate or spin out.

Well it is ethier Belt, Cluch ,motor ,Or transmission. But it does sound like your transmission . The loud clunk is the brake in the gear case ( Trans.). It might have broken off.

Apr 05, 2009 | GE WJSR2070B Top Load Washer

1 Answer

My Kenmore 80 series washer just started making a loud Aihaiha electrical or motor type noise. This happened during a heavy load cycle. Noise was very loud. When I click to regular, delicate or hand wash....

The following are the reasons for the drum not spinning :-
* Test the lid switch
* Test the timer control
* Test the centrifugal switch
* Test the water level switch
* Inspect the motor coupler
* Inspect the drive belt (belt drive only)
* Inspect under the washer for soot (clutch)
* Test the motor
* Inspect the pulley
* Test the transmission

In the case of loud noises in the machine, the drum bearings might have been damaged and might need a replacement. Also do check the leveling of the machine. Good luck.

Feb 28, 2009 | Washing Machines

2 Answers drain but clicks instead...agitates and drains fine 110.92195110

not sur if you found your problem bu I found what was happening with my washer. I pulled the trans and motor assembly out and found a plastic gear / cam broken. I think the part number is 64194. it's found between the clutch and drive to the drum.

Jan 06, 2008 | GE Profile WPRE6100G Top Load Washer

2 Answers

Loud clicking noise - wont agitate or spin

I had the same clicking noise. Turned out to be the coupling between the motor and transmission. A $15 plus 1 hour labor fix

Nov 10, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides