Question about Singer 7444 Mechanical Sewing Machine

2 Answers

Singer 744 beeps

The machine just beeps when I try to do anything- I rethreaded and it didn't help. The manual doesn't seem to have any troubleshooting tips for this.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers
Re: Singer 744 beeps

Your problem is most certainly with the buttonhole switch. Firstly: Look if the buttonhole lever, left back of machine, is push up in position. The beeping sound is a warning message. Secondly Remove the light cover, left of the machine, loosen back screw and remove left hand screw completely. Check for a small black electric switch, follow the brown and green elecrtic wire, just back of the light. If you push the BH lever up and down the switch finger should also move up and down. If it stays down, the machine will not work and give a beeping sound. If the switch finger is stuck, push it up with the BH in top position. Hope this will help you

Posted on Jan 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Singer 744 beeps

This site is wonderful. I can't seem to locate the manual and it beeped when I tried to use the buttonhole attachment. It works perfectly now. Thanks, ptppat

Posted on Jan 23, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have an error E4 on my Singer Sewing Machine. I have searched the manual and cannot find anything on this error. I have only used my machine a few times. It is brand new.

if it's still under warrenty I suggest taking the machine back.
try changing the needle
try turning the bobbin the opposite direction
if you have a front or side loading bobbin case try reinserting
the bobbin case back in the machine
or it could be the motherboard has gone bad, or the foot pedal

Dec 01, 2012 | Singer 7258 Sewing Machine

2 Answers

Start sewing and starts beep say e2

try rethreading the machine top & bobbin
clean under the needle plate & in the bobbin area for loose threads or lint
try changing the needle

May 20, 2012 | Singer 7422

2 Answers

My Singer Brilliance 6180 flashes E7 there is nothing about it in the manual

try changing the needle
try using a different bobbin
if these suggestions don't help then I suggest you take the machine to be checked

May 17, 2012 | Singer Sewing Machines

1 Answer

Singer 8770 beeps twice then stops stitching

do you have a manual?
try a new needle
adjust the top tension
try rethreading the machine top & bobbin

May 16, 2012 | Singer Curvy 8770 Electronic Sewing...

1 Answer

I have a problem with my sewing singer machine 744

Go to and download a free manual. You do not say what your problem is, no one can help you if you don't say what the problem is.

Oct 11, 2010 | Singer 7444 Mechanical Sewing Machine

1 Answer

I have a Singer 9005, and the top thread doesn't seem to be catching the bobbin thread. I have rethreaded according to manual, worked with the tension, changed the needle. No better. What could this...

you might try holding the top thread tail 3-4 inches to the left side of the machine & turn the hand wheel manually on the right side of machine & slowly put the needle down & see if it will pick up the bobbin thread that way

Sep 21, 2010 | Singer Sewing Machines

1 Answer

I am trying to sew with the machine and get a beeping sound. I have rethreaded several times all with the same results. Also where do the error messages display?

I do not have access to a manual for this machine.

Look through the back, near the maintenance section of the manual for the error message codes and where to view them.

Apr 10, 2010 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Machine beeps and stops sewing, no error message displayed

sounds like not through the tension plate (on top) right... rethread and make sure you hold the thread taunt toward you as you putt through top tension... you should hear a slight click and some resistance...

Apr 08, 2009 | Singer CE-200 Quantum Futura Computerized...

1 Answer


You can find free manuals to down load from singer ..

Please vote !!

Jul 13, 2008 | Singer 7444 Mechanical Sewing Machine

4 Answers

Singer futura CE-100 4 blinking reds lights

This error indictaes that the upper thread is broken. If it is not the sensor is telling the computer the thread is broken. Try tightening the upper thread tension some and rethread the upper thread.

Dec 23, 2007 | Singer CE-100 Futura Computerized Sewing...

Not finding what you are looking for?
Singer 7444 Mechanical Sewing Machine Logo

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides