its a good chance its the convergence circuit causing the shut down
there are a couple ics
you will have to trouble shoot it down to the area
if you hae the tools and know how you can fix it or you may want to contact a servicer in your area to assist
Panasonic HDTV 2000 purchase. Lost picture and sound suddenly. Turned it on and it continued to...
(More)
Panasonic HDTV 2000 purchase. Lost picture and sound suddenly. Turned it on and it continued to click off automatically then sound stopped. When I tried to turn it back on no picture and no sound but it would not just click off by itself. Had not previous trouble with television.
our Panasonic PT-47wx53g TV turns on for just a second and then clicks off ... do you have any...
(More)
our Panasonic PT-47wx53g TV turns on for just a second and then clicks off ... do you have any suggestions on how to fix?
Panasonic PT-47WX53 53" projection TV TV shut down with 3 blinks.I replaced one resistor and...
(More)
Panasonic PT-47WX53 53" projection TV TV shut down with 3 blinks.I replaced one resistor and both I/C chips and TV turned on and stayed on for about 5 minutes and at convergence set up on TV, screen started bouncing and TV again shut down. I then replaced all the back resistors and TV turned on and again shut down with 1 blink. I replaced remaining resistors on front I/C with no luck. SD Tech had me to unsoder I/C and TV turns on and stays on. He had me to install two more new I/C. Still no luck. I have replaced all resistors and convergence chips two times. with chips sodered TV can be turned on with light box on table with remote but shuts down in a few seconds. When I unsoder the I/C chips TV will turn on and stay on until I turn it off with remote. This is the same thing that happened with first set of I/C chips. SD Tech has been very helpful.Can He or anyone else help solve this problem.
I need an upgrade for my Matsushita Wireless Manger. It will only run on XP computers and I need a...
(More)
I need an upgrade for my Matsushita Wireless Manger. It will only run on XP computers and I need a newer version to run on both XP and Vista, and probably Windows 7.