Question about Polaroid FLM-2011 Television

1 Answer

Polaroid FLM-2011 When we hook up our Polaroid FLM-2011 to our cable it sparks. I contacted the cable company and they said it's the tv and I contacted Polaroid and they said its the cable. It actually blew a cable box. Can someone offer assistance?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Connect the leads of a voltage meter to a short cable tv jumper cable connected on one end to the f-connector on the back of the tv, positive lead to the center conductor and ground to the outside of the cable fitting with the meter set to ac setting. A normal tv will show a couple of volts but nothing higher. if you have higher voltage there is a problem with the tv.. If you hook this cable to the catv feed from the outside of the home which connects to the tv and you test in the same way and there is voltage then there is a problem with the cable tv or a power grounding problem. If there is voltage on the incoming cable call the cable company and the power company to find the problem before you end up with a possible fire.

Posted on Apr 01, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I can't find the manual to download. I lost my copy for my FLM 2011 TV

Get into this link where you can download the user manual of your poloroid FLM 2011. It is an adobe acrobat document. You must have Adobe Reader installed in your system to read it. Reader can be downloaded and installed from site for absolutely free. OK

Jun 27, 2011 | Polaroid FLM-2011 Television

1 Answer

I can't get tv to send sound to sound system

Having browsed the user manual I wonder if you plugged in the Sony BDV T57 Home Theatre System while the Polaroid FLM-2632 tv was powered down via the optical cable .
Then powered up the Sony BDV T57 Home Theatre System first and then powered up the Polaroid FLM-2632 tv
Maybe the Polaroid FLM-2632 TV has to detect that the Sony BDV T57 Home Theatre System is connected and powered up when the Polaroid FLM-2632 powers up. To activate its digital audio out ????
The note part about only being available only under HDTV (cable/air) mode. Might be the cause of your hassle also ?

source from
? Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver's audio LINE IN jacks to LCD TV's
AUDIO OUT jacks. ? Connecting to Digital 5.1 Sound System:
Use an optical cable to connect the audio amplifier's OPTICAL IN jacks to LCD TV's
Use a coaxial cable to connect the audio amplifier's COAXIAL IN jacks to LCD TV's
Note: Above mentioned function is only available under HDTV (cable/air) mode.
? Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
? Press the button on the remote to turn on the LCD TV."

May 25, 2017 | Polaroid FLM-2632 Television

1 Answer

I have my polaroid hooked up with an hdmi cable

Thats because your TV is not high definition and cannot process the high def signal. serial hook up does not give a highh def signal.

Nov 09, 2009 | Polaroid 15'' HDTV Monitor FLM-1511

2 Answers

FLM-2011 will not turn on

does anyone have the answer to this problem. it seems like alot of polaroid tv's are doing this. please if anyone knows how to fix the tv and get it to turn back on and not flash red to blue anymore, please let us know.

Jun 28, 2008 | Polaroid FLM-2011 Television

1 Answer

Connecting to a computer

If you don't have a VGA input on your TV, you need to convert the signal using a device like this:

PC to TV Converter

Jun 05, 2008 | Polaroid FLM-2011 Television

1 Answer

Polaroid FLM-2011

On Polaroid tv's ther is no individual parts available. You have to replace the control module.
Send me the model and serial number and I will give you a Quote on the cost of the module.

Lou Margo
Allied Electronics
908 276 8987 cel 513-490-0759

Nov 28, 2007 | Polaroid FLM-2011 Television

2 Answers


My cox remote guide lists for the Polaroid TVs the following codes:
LCD TVs: 1276 and 1316
TVs: 0765, 0865, 1276, 1314, 1316, 1326, 1327, 1328, 1991, and 1992

I hope one of them works.

Sep 10, 2007 | Polaroid FLM-2011 Television

Not finding what you are looking for?
Polaroid FLM-2011 Television Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides