Question about GE Tritonr XL GSD6260JCC Dishwasher
The problem that I am having is that there is a small amount of water that doesn't drain after use. My dishwasher is only about 1 1/2 to 2 years old. I have checked the drain line and its clear of clogs. I also checked the inside of the dishwasher and removed some debris but not enough to clog anything. Any suggestions ? Thanks
It's normal for a little water not to drain. However, many times it's that the drain hose isn't looped up high enough under the sink and water is draining back from the sink or disposer drain- into the dishwasher. If there's a disposer, be sure to run it once in a while, a good time is when the dishwasher drains. The hot water and detergent keep the unit clean, and draining correctly.
Posted on Oct 24, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Cut off the power at the breaker for 5 minutes and then turn it on and see if the system resets!
The machine was in your home 3 years , and used for more than that by someone else! I can tell you by the model that its at least 10 years old!
appliances more than 9 years old cost you money to run and fix! Throw it out and do not put good money into bad!
The new ones no matter how inexpensive will wash better and cost you a hell of a lot less to operate. They are so much more energy efficient today that they pay for them selves in a couple of years! With a new machine watch your water and power bill go down!!!
Other wise you need hands on service!
if you got the money do it new!
Posted on Sep 07, 2008
SOURCE: GE Triton XL Dishwasher
My Triton XL soap dispenser still has a clump of soap after the cycle has finished. My glasses are left with a cloudy film, and my silverware is left marked with film on it. I have cut down on the amount of detergent, and have not overfilled. I have also tried using white vinegar as the manual states. Any suggestions? Thank you
Posted on Sep 13, 2008
Step 1: Remove the cap that holds the sprayer arm on.
Step 2: Remove the sprayer arm, the screen, the pump housing, a bolt, the upper impeller, the food disposer blade, a spacer plate, the impeller hood, a flat plate, an O-ring, and the lower impeller. Lay the parts out in order as you disassemble them so that you'll be able to reassemble them properly.
Step 3: Clean the parts thoroughly with a mild detergent solution. If any parts are worn, replace them with new ones made for the dishwasher.
Step 4: Replace any seals, such as the O-ring or other washers, with new ones.
Step 5: Reassemble the pump, keeping the parts in order.
To reach the water pump, remove the sprayer arm and screen and then the pump housing. Remove the bolt, and the pump components can be disassembled.
On some dishwashers, the lower impeller serves as a drain pump. This type of system usually has a reversible motor; machines with nonreversible motors have drain valves, as detailed previously. If your machine possesses this impeller pump system, and the water will not drain from the dishwasher, clean the lower pump impeller. This may solve the problem. Otherwise, call a professional service person.
Posted on Oct 12, 2008
Tips for a great answer:
Apr 24, 2015 | GE Tritonr XL GSD6260JCC Dishwasher
Jul 23, 2010 | GE Dishwashers
Jun 04, 2010 | GE Tritonr XL GSD6260JCC Dishwasher
Oct 19, 2009 | GE 24 in. GSD6660GSS Built-in Dishwasher
Nov 17, 2017 | GE 24 in. Profile PDW7800 Built-in...
Jan 17, 2009 | GE Tritonr XL GSD6260JCC Dishwasher
Aug 17, 2008 | Dishwashers
Feb 01, 2008 | GE Tritonr XL GSD6260JCC Dishwasher
Sep 03, 2017 | Dishwashers
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: