(877) 477-7278
Washer and Dryer parts delivered overnight...
Answer
sensing button stays on and dryer does not start
Problem for Whirlpool GEW9250 Electric Dryer
I am getting no help!!
By turningpo646 on Nov 07, 2009
I am getting no help!!
Comments:
Nov 07, 2009
- I have a whirlpool dryer (GEW9200LW1) The power comes on but when you push the start button it only beeps, but does not begin? Please help me! Comments: Nov 07, 2009 - The door is closing properly and the light goes out when it is closed. I am still having the same problem (not starting).Nov 07, 2009
- It will not start when pressing the start button.Nov 07, 2009
- I have a whirlpool dryer (GEW9200LW1) The power comes on but when you push the start button it only beeps, but does not begin? Please help me! Comments: Nov 07, 2009 - The door is closing properly and the light goes out when it is closed. I am still having the same problem.Nov 07, 2009
- Again, getting no response!!Nov 07, 2009
- I am getting no reponse from C. Johnson287 are you sleeping on the job?Nov 07, 2009
- what are you doing?Nov 07, 2009
- C. are you going to help me?Nov 07, 2009
- How do I get to another person who will help?Nov 07, 2009
- By the time I get some help from CJ... I will have already dried my clothes on the line outside!Nov 07, 2009
- Is CJ is the bathroom or what?Nov 07, 2009
- Can I Please get CJ's surpervisor?Nov 07, 2009
- Helloooo any one home! This is quite a immediate response! NOT!!!Clarification Request
Posted by sac_guy41 on Nov 09, 2009
I will try and help you. You should be getting a two digit error code displayed? Are the lights appear to be DIM if so this is another problem. If the answer is no to the two questions above then the first thing we need to do is put the dryer into diagnostic test mode. Make sure dryer is in standby Press the cancle button make sure no lights are lit. Now press the following buttons in this order with in 5 seconds. More time > Less time > More time > Less time. You should see the digit display 88 and all other indicators lights on as well. If you get an Error code E1 or E2 Then the problem maybe the thermistor. If you get an Error code E3 = Check cabling from display panel (buttons & lights) to the control board. If connections are okay replace control board. Post results of test and we can go from there.
Posted by seaniebawn on Nov 08, 2009
what's the problem?
Posted by hunter19_46m on Nov 08, 2009
You have to post your problem...You will never get help otherwise. Make sure you post in a clear and concise manner to describe your problem and what make and model your dry is.
Posted by cjohnson287 on Nov 07, 2009
Whats your dryer doing?
Popular Solutions for Whirlpool GEW9250 Electric
Questions and Unsolved Problems for Whirlpool GEW9250 Electric
Do you recommend Whirlpool GEW9250 Electric Dryer?
Answer
Answer
the dryer control panel is not working. Sometimes it wont turn on at all. When it does, the dryer...
(More)
Answer
the dryer stopped heating. any ideas? mark
Answer
How to fix dryer element Clothes do not dry on first cycle.
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Whirlpool GEW9250 Electric...:
Related Products & Issues:
Top Dryer Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Washer & Dryer Repair
Best Dryers
Recommended by Owners
Recommended by Owners
