from time to time the mashine is not evacuate the water and the mashine will not start for a new load .I have to unscrew the filter,drain the water and then will wash. Is a problem with the pump? thank you Harry .
a front loader huh, usually there is an access panel at the bottom front held on with 2 screws. remove this panel and trhere should be a trap filter that is plugged up. remove filter and clean it out, than put it back. or the water pump is going bad try the filter first.
Was this helpful?
Yes
No
Popular Solutions for Whirlpool LHW0050PQ Front Load
The machine seems to no longer wash -- i.e., the machine fills with water, it grabs the soap, then...
(More)
The machine seems to no longer wash -- i.e., the machine fills with water, it grabs the soap, then it cycles through the remainder of the cycle without the inside moving - no "washing" and no spinning...