Recently upgraded Windox XP, SP2 and now my printer is not working. At printing prompt, it feeds a page and spits it out blank - no attempt at printing. Performed a printer test and it printed fine - in color anyway - the black did not print (new cartridge).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solved: I can hear it printing, but the paper is blank when it's finished. ... Mark as New; Bookmark; Subscribe; Subscribe to RSS Feed · Highlight · Print · Report ... green checks say every thing is good to go, but the test print comes out blank,. ... Reinstall the cartridges into the product, and then gently close the cartridge door.
i had the same problem. but the soultion i tried didnt work. so if this works tell me how it did: press the power button the the x button on your printer, WHILE PRESSING THE POWER BUTTON, the release the x button.
The blank pages is normally due to dried ink in the print head nozzles. Even by replacing the cartridges, the blockage remain.
You can clean the print head with some wet lint less (camera lens) paper soaked in iso-propyl alcohol.
If the blockage is wet, running a cleaning cycle a few times will normally remove the blockage after doing the above steps.
Ok, first off, system specs:
- Windows XP Home SP2
- HP PSC 1*** (not sure) Inkjet Printer
In MS Office 2003, when you print a document, the printer spits out a
blank page. When I did a test page in the printer settings, the test
page printed perfectly fine. And pretty much any other non MS based
program prints (tested: AOL EMails/webpages [IE6]).
I reinstalled the drivers and checked for updates...all good. Restarted the PC with printer unplugged and vice-versa.
hi,check your printing setting and then print.
uninstall the printer then install the printer again then printer has default setting and print the paper.
sometimes printer current pages print wich is selected by setting.you must select all the pages.
to change the setting,,,
1-open control panel then open printers and faxes then check seeting.
HI there make sure that the paper tray guides are fully against the paper also try sending the job through the manual feed to see if you get the same problem. If you do not then it maybe that the paper cassette separation pad is worn and will need replacing. If your model has no rubber pad at the front of the cassette then you will have a metal hold over one corner of the paper make sure that when the paper lifts that the paper sits under the silver (Dog Ear) as this acts as a separator.