the instruction at "0x77d4bbcd"referenced memory at "0x00000048".the memory could not be "read" click on OK to terminate the program click on CANCEL to debug the program
This error comes when there is issue with harddisk clusters. First open cpu cabinet and find motherbord. Refix RAM memory. Then boot computer with windows disk or recovery disk. For that when you power up the computer press F1 or F2 or "del" key to enter in bios screen. Then go to boot option and set first boot device as your cd/dvd rom . Then save settings and exit. Then insert disk in cd/dvd rom . Then it boot with that disk. Then follow the procedure and enter in recovery console mode.Then type in prompt "chkdsk /r" then press "y" Then it fix error on harddisk. Then check. If still same error then you have to repair your widnwos.Follow the above procedure again and this time choose "R" option for repair previous windows. Let me know if you need more assistance.Thanks.
Was this helpful?
Yes
No
Popular Solutions for PC Chips MB PCCHIPS P25G V3.0
I have a SOYO Sy-VDA Mother board and it will not recognize a USB key board. I have set the Bios...
(More)
I have a SOYO Sy-VDA Mother board and it will not recognize a USB key board. I have set the Bios accordingly.
desconect? todos los dispositivos y al momento de volver a conectarlos olvid? como estuvieron...
(More)
desconect? todos los dispositivos y al momento de volver a conectarlos olvid? como estuvieron conectados los conectores del panel frontal. ahora el pc no enciende