I have a Kenmore Elite Oasis-Canyon Capacity. Model: 27082603. When there are 17 minutes left in the...
(More)
I have a Kenmore Elite Oasis-Canyon Capacity. Model: 27082603. When there are 17 minutes left in the cycle, the machine stops, starts beeping and "F1" shows on LED panel. We have learned that if we press "Stop", then "Start" it will start again for about 5 seconds then goes back to "F1" situation. If we do this 5-7 times in a row, the machine kicks in and finishes the load, but this is a ridiculous set-up. We've been doing this for over a year! Can we re-set the computer somehow? Or is there a recall on this, since it is obviously a problem for more than just us? Now we have an additional situation where the machine doesn't stop filling during the rinse cycle. We turn the power off, the drum drains. Then we turn the power on and pick a shortened spin cycle to finish the load. SO ridiculous!
I Bought a used Kenmore Washer and Dryer and we hooked it up and its leaking out the bottom. I;m not...
(More)
I Bought a used Kenmore Washer and Dryer and we hooked it up and its leaking out the bottom. I;m not sure what Model it is, I just know its about 5-10 years old and the have a brown panel looking back to it.