(513) 874-3306
We fix and repair laptop motherboard no video, no...
Answer
my e4034 is sounding an alarm when I try to switch it on, lights to keyboard, mouse and monitor but...
(More)
Problem for E-Machines eMachines Desktop PC
I have a desktop pc that will not stay powered on
By metroidfan7 on Nov 07, 2009
i have a desktop pc that will not stay powered on for more than one minute. not even enough time to get to the logon screen
Comments:
Nov 07, 2009
- I am not getting a BSOD, there is nothing wrong with the hard drive booting sector as far as i can tell, i think it is a motherboard problem... the power indicator will just turn orange, and the monitor goes into power save mode. at first i thought it was a power source failure, so i replaced the current power source with on from another pc that i know works fine, with no change.Nov 07, 2009
- I am not getting a BSOD, there is nothing wrong with the hard drive booting sector as far as i can tell, i think it is a motherboard problem... the power indicator will just turn orange, and the monitor goes into power save mode. at first i thought it was a power source failure, so i replaced the current power source with on from another pc that i know works fine, with no change.Nov 09, 2009
- The fan is working, i do know this, everything remains on. Just the power LED turns orange, as if it goes into hibernation mode, unable to return...Clarification Request
Posted by JYP_666 on Nov 07, 2009
Possibly overheating, or you have a BSOD. Try repeatedly pressing F8 while booting, and, if it will let you, boot into safe-mode or disable automatic restart on system failure and if it DOES give you a BSOD, write down the number's shown, and post here. If it won't let you do that, it's more likely overheating. Probably due to dust or a failed fan. I will try my best. Pete.
Solution #1
posted on Nov 07, 2009
I would make sure the CPU fan is working. Your processor will burn out very quickly without airflow and will automatically shut down.
Comments:
Nov 09, 2009
- OK - the CPU fan stays on. That is very good. Now you might try to jumper your board to reset the BIOS. There is a 3 pin jumper. It should now be set to normal ( 1-2 ) to reset BIOS set jumper to (2-3 ). You may have to look this up in your manual or look around where the nickel shaped battery is placed on you board. You will see some jumpers here and with a magnifier it will be printed CLR and NRL or some such. When you reset your bios, you will have to reset time of day and date. I hope this fixes it. It sometimes does.Yes
No
Popular Solutions for E-Machines eMachines Desktop
Questions and Unsolved Problems for E-Machines eMachines Desktop
Do you recommend E-Machines eMachines Desktop PC?
Answer
Answer
I cannot run chkdsk /r because emachine media centre keeps shutting down with BSODS & the...
(More)
Answer
Just saw emachine ET 1331G-03w at WalMart. Will it support 4 monitors? If not what computer would...
(More)
Answer
computer running slow stuff keeps popping up
Answer
Has anyone got a spare side panel for a emachines 420
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For E-Machines eMachines Desktop...:
Related Products & Issues:
Top PC Desktop Experts
Experience:
30 Years of professional repair and design.
Ask Me
Top Computer & Laptop Repair
Best PC Desktops
Recommended by Owners
Recommended by Owners
