Question about Vacuums

1 Answer

Vacuum stopped working

Vacuum was working and stopped now it will not turn on

Posted by on

  • 7 more comments 
  • Morris1 Jan 06, 2008

    Cord pulled out of wall and stopped working.



    1. Does the Kirby G6 have a fuse? How can it be replaced?



    2. It could also be the power cord. Can I cut off and replace the plug?



    Thanks

  • Anonymous Feb 25, 2008

    not working - power getting to system, red leds flash but nothing happens

  • sunflower62 Feb 25, 2008

    not working.

    power supply checked

    roller and brushes cleaned

    red leds flash on then go off

  • Anonymous Jun 19, 2008

    not getting power.

  • Anonymous Jul 29, 2008

    Dyson just stopped working ans now it won't turn on. Cleaned a mat then it went very slowly and then shut down.



  • Anonymous Sep 01, 2008

    checked bag   checked fuses


  • Anonymous Nov 02, 2008

    Vacuumed all day yesterday, went to use it today, will not turn on. Have tried it in more than one outlets, have used other stuff in the same outlets.

  • rkpropp Dec 01, 2008

    I was using it and shut it off to move along. When I turned it back on it wouldn't come on! I checked all the filters, connections and different outlets!! Whats up??

  • Anonymous Dec 19, 2008

    i was using it turned off went to turn back on and it blew a breaker does it have a fuse i can replace?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

Could be a bad cord, sometimes it can be a switch.

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrolux Precision vacuum brushes stopped turning and a red light turned on


there's a reset button down on left side of powerhead in the black plastic at base that corrects the problem of that red light

Jan 12, 2013 | Electrolux Vacuums

1 Answer

Electrolux Harmony Not working


maybe it is clogged. does the light go out if you turn it on with no bag?(for testing)
is the roller spinning?

Jan 07, 2010 | Electrolux Harmony Canister Vacuum -...

1 Answer

Blown vacuum fuse?


Sounds like you got a clog in the hose, which depleted the suction. After getting clogged the motor was working overtime and burned up. If your vacuum is still under warranty you should bring it to a warranty repair center to be fixed. Changing a motor in a vacuum is almost as expensive as buying a new vacuum cleaner. So if your vacuum is out of warranty I think you should probably buy a new one.

Oct 09, 2009 | Vacuums

1 Answer

Vacuum just stopped, won't turn on


Take it back under guarantee, could be faulty mains lead or switch or motor

Sep 20, 2009 | Hoover U5194-900 Mach5 Multi-Chamber...

1 Answer

Vacuum roller stops turning


with cleaner plugged in and turned on, push the little reset button on the side of the lower base of vac. Remember that the brush will not turn in the upright position. release your handle and you should be in business. hope this helps. please let us know. thanks renevacdoc

Jul 22, 2009 | Kenmore 31913 Progressive Direct Drive...

1 Answer

While using the vacuum, the brushes stopped turning.


check the drum. Hair will rap around the axxel and stop the brush from turning. Cut this hair with a razor and place a small drop of oil on the end of the axel.

May 08, 2009 | Kenmore 23313 Whispertone Bagged Canister...

1 Answer

Will not turn on. Fully charged.


SOUNDS LIKE THE BATTERY IS SHOT AND WON'T TAKE A CHARGE.DOES THE CHARGER PLUG DIRECTLY INTO THE VACUUM.IF SO SEE IF IT COMES ON WITH THE CHARGER PLUGGED INTO IT.IF IT COMES ON THEN THE BATTERY IS NO GOOD.PLEASE LEAVE FEEDBACK

Mar 26, 2009 | Euro-Pro Shark Cordless Stick Vacuum...

2 Answers

Eureka 4870 vacuum brushroll control doesn't work


Use two hands to presscontroll button upward until it snaps in place.

Jan 05, 2009 | Eureka Smartvac 4870 Bagged Upright Vacuum

1 Answer

Vacuum stopped working


Sometimes after years of use the power cord can break internally where you won't see it. Look for damage or twists in the cord. With the vacuum turned on wiggle these areas between your hands and see if it tries to run. If so replace the cord. If not the switch may be bad or the motor needs to be serviced. Good luck. Please rate me so I know if I helped.

Dec 30, 2008 | Kirby G5 Bagged Upright Vacuum

1 Answer

Vacuum doesn't work when main attachment is on....


S3765-040, power head would not run when the handle was elevated. Problem was with wiring from connecter plug on power head swivel into the power head itself, because of the design the wire tends to develop a short. Test it by turning on the vacuum, elevate the handle, then when it stops running move the visible part of the wiring with you foot/hand. If it starts/stops then you have a short. Replacement part was about $10.

Oct 17, 2007 | Hoover S3765-040 WindTunnel Bagless...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

1,351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...