The ribbon cable for the top switches has come loose.Undo the four screws holding the LCD screen (two are special--I used the corner of a small flat screwdiver), then gently prise the camera apart and try not to dissconnect the ribbon cable for the menu buttons --it's a pain to get back on again. Gently ease the ribbon cable for the top switches further into the socket and all shout be well---if it is hard to move flip open the black locking flap on the socket
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have problem with camera operation failed in my nokia C3 01. I can`t take the photo at all. i don`t know why like this.When i start camera of nokia c3 01 ,it show operation failed and Camera on Standby
I took the ****** apart and found two spring-loaded black triangular plastic pieces poking out of two rectangular chips about 2mm square, just below the circular piece on the outside of the camera that changes mode – play, video, camera. Actually I found one of the above, because the second triangular piece was stuck in the closed position. A bit of jiggling and voila the problem was fixed.
That was the good news. The other news is that I must now reinsert inside of the shell a black circular piece of plastic that affixes to the rotating circular piece on the outside of the camera that changes the mode. When properly attached this circular piece manipulates the triangular pieces to change the mode.
I think that the likelihood of getting this piece properly aligned and affixed so that it moves the triangular pieces properly when the mode knob is rotated falls into the statistical probability range of pork taking wing. But worth a try.
It appears that the software crashed. Take the batteries and the memory card out, press the on/off button as if you are turning the camera on (this is to drain any residual power in the camera). Leave it for a few moments (10-20 seconds) then put the batteries and the card back in and restart the camera. If the camera has a reset button or reset hole try this too. Good luck.
The sliding button above the LCD display has three settings. You need to slide the button to the right, A camera icon for taking pictures, a movie camera in the middle and the green arrow on the left to view pictures and movies taken