My electrolux vac shut off for a full bag. After replacing the bag the vac won't start and the bag full light stays on.What should I be looking for to resolve my problem?
If the suggestion that renevacdoc did not work, it is most likely that your valve assembly(full bag control) has gone bad and needs to be replaced. You will have to take your vac to the Aerus/Electrolux dealer/service store for repair. Joe
take your bag out of the unit flip bag over and re-install. Make sure that the bag cardboard is flat and it is installed evenly. There is a bag-lock-out switch located inside the rim of the unit, and it wont start if it isn't pushed down by the bag. I think this will solve your lux blues! Please give feedback if I helped you, it really helps my rating! I appreciate YA! Remember to have your unit serviced once a year by a qualified tech! Rene (Vacuum Doctor)
my electrolux ultralux 2000 was shutting off after using for 10 min then retarting? I thought maybe...
(More)
my electrolux ultralux 2000 was shutting off after using for 10 min then retarting? I thought maybe that it was over heating due to dust/dirt. I took apart blew the dust out put back together but now it does not turn on? I might have crossed wires? Can anybody help me get it back together correctly
Hello! I have an Electrolux Ultralux 2000, w/power nozzle Model N1150. While using it today, it...
(More)
Hello! I have an Electrolux Ultralux 2000, w/power nozzle Model N1150. While using it today, it apparently "choked" on a dolls hair in my daughters room. I removed the hair and checked for any blockage, and there is none. Now, the brush simply won't turn. I have pushed the reset button (ours is a switch) but still nothing. Any ideas??? Thanks!!
I have an electrolux ultralux 80th anniversary edition that was over heating and shutting down. I...
(More)
I have an electrolux ultralux 80th anniversary edition that was over heating and shutting down. I took apart and blew out the dust now when I put it together it does not come on. I may have reconnected the wires wrong and do not have the manual. Where can Im get a manual?