fault 37 - on my washer can you help me? It works sometimes . I think it will be a faulty switch or a blocked pump... Can I undo the pump myself? I am handy...
Well, I bit the bullet and I FIXED IT MYSELF!!!! I had to undo the main bracket .... which allowed the tiny water pump to be taken out. Surprising how small it is . Anyway there was a ball of fluff/lint ready to fall out !!! so I think I have fixed it . It was an anoying intermittent, but growing, problem - and these can be the worst to diagnose. This fluff was blocking the outlet! Have done a complete wash and will do more tomorrow. This machine has already done a mountain of work over the years; can now recommend. Cheers Gaz - the expert! [not]
error 136 keeps coming up.another site suggested checking ohms on the 5 way connector in the control...
(More)
ERROR 136 KEEPS COMING UP.ANOTHER SITE SUGGESTED CHECKING OHMS ON THE 5 WAY CONNECTOR IN THE CONTROL PANEL AND THAT IT SHOULD READ 32 OHMS.THIS DOSNT READ 32 BUT I GET A FULL SCALE DEFLECTION,CLOSED CIRCUIT ?
my intuitive washer knocks/bangs on spin then out of balance bell rings i think the top of the blow...
(More)
my intuitive washer knocks/bangs on spin then out of balance bell rings i think the top of the blow should have 3 legs and 3 springs i only have 1 spring and leg it connects 2. i think it has broken off 2 legs and 2 spring that puts it out of balance on spin can you buy the top of the tube blow and springs
Have a Fisher and Paykel top loading machine. Keep getting a code 37. It won't drain or spin. We...
(More)
Have a Fisher and Paykel top loading machine. Keep getting a code 37. It won't drain or spin. We already checked the hoses and they seem to be clear. I can't find our manual. What else can we do?