iomega model # RPHD-TG not being recognized by imac osx
blue light is on and i plug and unplug...
(More)
iomega model # RPHD-TG not being recognized by imac osx
blue light is on and i plug and unplug it but not recognized
It is a piece of hardware that connects to the parallel port, and then to the t.v. or vcr. It works...
(More)
It is a piece of hardware that connects to the parallel port, and then to the t.v. or vcr. It works fine with XP. Will it work with Windows 7? Thanks!
I have 4 settings in the bios raid autodetect/ahci raid autodetect/ata raid on all these get the...
(More)
I have 4 settings in the bios raid autodetect/ahci raid autodetect/ata raid on all these get the same result after I do the f6 and install floppy with raid driver i get a message saying (no harddrive you may need to check your disk related hardware configuration this may involve running a manufacturers supplied diagnostic or setup program setup cannot continue) if I use the other setting in the bios is combination I get either a stop error with blue screen or the the install gets to past the drivers .cab files then start showing up as not able to install till it finally says setup failed this is a brand new drive,I used the dell operating disk supplied,also 2 other xp pro disks and even a 2000 system disk they all do the same I am sure not all these disks are errored or corrupted I found out that you have to use a partitioning software called media direct I used this and still have the same problem of the setup disk when it is copying the files gets to the drivers.cab file then after that drops files saying they were not copied or error and windowsa may not work properly untill after about 5 of these the system just stops and tells me to reinstall windows as it did not complete properly