Hi, Intimus 421 SE problem. Motor pulsates in forward drive.Reverse drive perfect.Blades and sensors all clean.Electrical contact clicking noise from main PCB as motor stops and starts on forward drive.All connectors on PCB secure and no PCB dry joints. Any suggestions from you guys? Alan irvinealan@hotmail.co.uk
Comments:
Nov 07, 2009
- Hi,
Thanks for response.
Cutting heads all free and turning by hand. Reverse drive running OK.
When I cover the entry light sensor the motor starts to drive as expected. At regular 1 second intervilles it stops/starts/stops/starts.
Alan
shredder will shred about 3/4 of a sheet of paper then shuts off. If you open the shredder door it...
(More)
shredder will shred about 3/4 of a sheet of paper then shuts off. If you open the shredder door it resets the power switch and you can finnish shredding the remaining paper. is there easy access to the power swithc at the door?? model c-220c fellowes powershred
beam sees paper and starts to feed then stops then starts and stops but steady on reverse, could it...
(More)
beam sees paper and starts to feed then stops then starts and stops but steady on reverse, could it be the hold on contact? (It is an Intimus 421SE)
Machine continues to detect a paper jam. I can get it to shred by pushing the red roller button...
(More)
Machine continues to detect a paper jam. I can get it to shred by pushing the red roller button everytime it stops. I have cleared rollers of all paper that may have been stuck. I have turned it off and unplugged it in an attempt to reset.