(877) 477-7278
Washer and Dryer parts delivered overnight...
Answer
will not cycle
Problem for Whirlpool Ultimate Care II LSQ9564J Top Load Washer
Wash starts before water is full
Some times if the water level is set to a large load, the was cycle starts when there is only enough water for the small load in the washer. Vibration such as closing the lid hard can trigger this.
The lid interlock safety switch has been bypassed for a year since it failed.
Any suggestions?
Thanks, Barham
The lid interlock safety switch has been bypassed for a year since it failed.
Any suggestions?
Thanks, Barham
Solution #1
posted on Nov 07, 2009
most washers if put on a large load do start going around before the water has finished filling this is just to get all the clothes fully wet before the proper cycle starts to wash them it is just how the washer copes with a large load peter
Yes
No
Popular Solutions for Whirlpool Ultimate Care II
Questions and Unsolved Problems for Whirlpool Ultimate Care II
Do you recommend Whirlpool Ultimate Care II LSQ9564J Top Load Washer?
Answer
Answer
Have Whirlpool washer Mod LSQ9264HQ0 fills with water and stops. Won't go forward will add more...
(More)
Answer
Ultimate Care II has intermittent spinning and a small oil leak at bottom
Answer
water is in machine with clothes, agitated, now won't rinse.. when I put on rinse cycle is buzzes. ...
(More)
Answer
washer agitates and is filled with water... will not do the rinse cycle, makes a buzzing sound when...
(More)
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Whirlpool Ultimate Care II...:
Top Washing Machine Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Washer & Dryer Repair
Best Washing Machines
Recommended by Owners
Recommended by Owners
