Question about Sharp 64LHP5000 64" Rear Projection Television

2 Answers

A loud POP. No picture now.

I almost can't believe it. Last night I stayed up until 2 am fixing my convergence on my tv. Got the board in and FINALLY got everything alined. Was feeling pretty happy. Then this morning, while watching it, I heard a loud POP (a series of pops actually), then smelled a funny odor and the screen went black. I turned it off and back on. Only the red light in the front flashed. No picture. NOT COOL! I just spend $100 fixing my problem and now I have a new one. ANY THOUGHTS on how to fix this one too?!?!

Thanks.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 264 Answers

You have blown your start up chip it is called a (relay) normally a black box on the under bord it might have 4 pins 6 pins 8 pins make sure you now what you are looking forhttp://www.shop-com.co.uk/+-a-Relays-st.shtml this is where i get my relays hope you find what you are looking for

Posted on Jan 05, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

Sounds like filter capacitors in the power supply. did you replace the convergence IC's?

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud noise then lose picture


The green power LED probably is merely indicating that power is getting to your TV but the internal power supply is failing as evidenced by the loud "pop".

Dec 31, 2013 | Vizio P50HDTV20A 50 in. Plasma HDTV

1 Answer

PH-50T18 Prima The picture doesn' twork. Sound works. any suggestions


There is a power supply failure and this might need attention of a qualified service technician

Jul 11, 2012 | Televison & Video

1 Answer

My Toshiba TV was on like normal, then suddenly the green color seperated from the red and blue.. On the bottom left corner you can see the green is 4 inches up while the others stay at the bottom. So if...


Ur tv have a problems known as a convergence pictures problems,it is dead.Ur tv have any colors lines like R,B,G mis alignments,tv have any colors shadows pictures or have a 3D pictures look alike?Yes,than ur tv have a dead convergence board to causes the tv to have all of these pictures problems.The tv convergence board must have be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.

Sep 20, 2011 | Toshiba TheaterWide 52HM84 52" Rear...

1 Answer

I finally got my tv hooked up. but the color and the picture is blurry, mostly on the top. i have tried different things but no matter what it doesn't change the blurriness,and some lines come across...


Tv have a R,G,B colors lines misalignment,have picture shadows or 3D picture look alike?Yes,than tv have a problems known as a convergence problems,it is dead.The tv convergence board must be repair,by replacing like 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.

Jun 13, 2011 | Toshiba 57H81 57" Rear Projection...

1 Answer

I have a 55" rear


U tries go into the tv colors setup and turn down the color RED,might help?Tv could have a problems known a convergence problems,it dead very common problems for old DLP tvs.The tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the tv have a dead convergence board.The tv convergence board require changes 2 STK convergence ICS and some or all of it resitors too.For fixing the convergence board to solved convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 08, 2011 | Hitachi Televison & Video

1 Answer

The three colors are separated and will not show as one picture I hard a pop before this happened but all three bulbs look like they are working


The tv now have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to fix the convergence board to solved the tv picture convergence problems.The shop,will cost like $300-350 for parts and labors.

Jan 17, 2011 | Hitachi Televison & Video

1 Answer

Hi, I have the ws-65907 65", it was working last


No,this problems is not the projection lamp problems.The tv now have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or look like 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like 300-350 for parts and labors.

Oct 26, 2010 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

I just turned on my tv and there are shadows around everything on the screen. Purple ones on the left of the object and green on the right. I was just watching it last night and now it's doing this. ...


Very common problems with the DLP projection tvs.The tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignments,have colors pictures shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 12, 2010 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

I have a SONY WEGA flat screen, last night while watching tv, there was a loud pop in the tv, now the LAMP light keeps flashing and there is a grinding sound coming from in the set. No Picture, no other...


The loud pop was a capacitor blowing.

The light is flashing because either power board or ballast board is faulty.

Using the TV in this conditions can cause further damage.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

You can find parts here,

Appliance parts, electronics parts & more from PartStore.com

Encompass Parts Distribution

Electronic Replacement Parts: Plasma & LCD TVs, Appliances |

May 04, 2009 | Sony WEGA KDL-42XBR950 42 in. LCD HDTV

1 Answer

I have a Hitachi 57F59 Projection Color TV. Last night it started making poping sounds like an arc short and the picture would go in and out. Finally after one really loud pop, no picture. Looking in...


It has a common line output stage for the three tubes. It is most likely that the EHT unit has failed and it may have damaged the line output stage. The two faults are repairable to component level and will not need a new line board just an EHT unit. If you have sound, the power supply part is probably OK. Tell the tech to see page 124 of the service manual for a full schematic..

Apr 02, 2017 | Televison & Video

Not finding what you are looking for?
Sharp 64LHP5000 64" Rear Projection Television Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...