Question about Bosch Exxcel WFX 2467 Front Load Washer

2 Answers

Bosch Exxcel WFX

The drum just wont turn. I have cleared the pump area and checked it has just stopped working for no reason.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 90 Answers

Make sure it has power and if it does, is the door locking. If so does the time show and count down. If it does could be a belt. If it has power but control not functioning it could be a power board. Main thing to check is if the door is locking.

Posted on Jan 05, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 264 Answers

Your brushes have gone in your motor you will have to go down to your local second hand shop and ask them to do it it will save you money and time it should cost a bout 20 to 30 to fix

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Should my drum stop turning when i push it after the belt has broken


Dryer drums aren't always the easiest to turn but not difficult either. If you know for a certain that the belt broke and the drum is still reallty hard to turn then you probably have something caiught in the blower wheel area, like a sock or whatnot

May 10, 2012 | Dryers

1 Answer

Why wont it spin and drain


if its a front load washer check the drain pump,if it cant drain the water it will not go into spin cycle,depending on make/model the pump can either be accessed from the lower front or rear areas under drum inside the machine

Feb 19, 2012 | Washing Machines

1 Answer

Kitchenaid dishwasher wont drain. Drain hose has been snaked clear. Attachment to Disposal is clear. Hose is not kinked. Dismantled pump area inside washer and cleared all debris. Still wont pump out water...


If the cycles of the program are working accordingly then the most important thing that must be done is to CHECK and MEASURE the VOLTAGE at the DRAIN PUMP when the machine is in the rinse cycle.
If there is no voltage then the program controller is faulty. If there is voltage then the pump is defective. You can test the pump using a meultimeter or power it externally

Oct 06, 2011 | Dishwashers

2 Answers

MY BEKO 765s washing machine, has stopped working mid load, on the display it is flashing iL but its smaller, it has also gone onto pause, and wont go on to start, also on flashing on 1200. This was a...


Hi if your beko 765s washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Dec 31, 2010 | Televison & Video

2 Answers

Drum does a small turn then stops but wont empty -wont wash either beko 1000 rpm


Hi if your beko 1000 spin washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Aug 23, 2009 | Washing Machines

1 Answer

Fridgidaire Affinity AFT6500GG won't spin or fill up.


Check the hose from the drum area to a fill control valve. It will be a small hose. If it is clogged with lint, the control valve can't work. Try to undo it at both ends and rinse it out.

Apr 27, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Indesit wd125 drum wont turn


check your pump it may not be working

Dec 18, 2008 | Indesit W 123 Front Load Washer

1 Answer

Drum wont empty...have checked pump, seems to be working becasue some water is being pumped out..have checked filetr to pump and removed a couple of small buttons..outlet hose seems fine because initial...


It obviously is related to the pump and outlet hoses.
If it is a tap in waste then check for obstruction there,
Remove drain hose completely and run water though it to make sure it is fully clear.
Check inside the pump itself for any obstruction , if you are satisfied that every thing is o/k, then as a last resort, fit new pump.
Plz leave feedback for this solution.
Thanks.

Dec 14, 2008 | Hotpoint WMA35 Front Load Washer

2 Answers

Whirlpool front loader washing machine (AWO3361) WONT DRAIN


Remove drain hose from where it connects to the plumbing under the sink/tub. Inspect the spigot. If clogged, clean. If clean, then tilt machine back and remove drum to pump hose from pump. Check hose and also drain pump. Clear any obstructions.

Nov 03, 2007 | Washing Machines

1 Answer

Maytag performa pye/g2200,3200


when you say the drum wont spin even manually. Do you mean the drum is too stiff to turn by hand? If so the bearings may have seized up solid. If the drum is free to turn by hand, the pump may be blocked, or burned out & not allowing the water out. If so the circiut wont allow the machine to spin. If thats the case, unblock or replace the pump

Oct 20, 2007 | Maytag PAV2300 Top Load Washer

Not finding what you are looking for?
Bosch Exxcel WFX 2467 Front Load Washer Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

78919 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...