Question about Video Game Consoles & Games

2 Answers

Router not working at all

I plug my router in, connecting the WAN and 1st computer out links, and not only does it not recognize the fact that anything is plugged in, all of the lights go out. I tried it without plugging any network cables in, and the same thing happened after about 30 seconds. Anyone know what might be causing this?

I having problem with my router i did what the maual say and nothing i buy it from best buy and the router model no is dx-402 and the product name is dynex 10/100mb router Iam try to hook my internet with my playstation together so when my son play the game i still can be on the internet to but nothing happen when we hook the router up someone please help me rosalind-gray@bellsouth.net

Posted by on

Ad

2 Answers

I've tried using D-Link before and my playstation 3 acknowledges that it is there but it says it doesn't recognize it. Am I just asking the same question in a different context, sorry if I'm doing that I'm very tired at the moment.

Posted on Jan 09, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 64 Answers

If you followed what the manual said ie. resettting the router and it still has the same problems it could be an internal problem. If all of the lights are going out, even when nothing is hooked up then it;s nothing your doing wrong. Take it back (depending on how long ago you bought it) and get a new one, I don't sugggest getting the same brand or model though. Try and stick to a D-Link brand or Linksys, there are litlle bi tmore money but proven and more reliable. Even if you buy a wireless try and use a wired connection for your hook ups, they are more secure, faster and no interferance. Hope this helps!

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Linksys router not recognize internet


Make sure your router's WAN port is set to dynamic IP. If the light on the front doesn't glow/blink for the WAN port, try a different cable. If a different cable doesn't work it's probably toast. :( This problem appears to be directly linked to the relationship between the WAN port and the modem. Given that the devices can connect to the router, but not internet, it has to be the WAN. Sometimes if the modem goes out it will send too much voltage through to the router and fry the WAN. Had that happen to my parents router. If the above doesn't "fix ya" then try a different router.

Worst case, you might have to put a wireless card in your PC and bridge the modem (wired connection) to the wireless card and broadcast for your wireless devices. At least until you get a new router.

Aug 02, 2013 | Dell Computers & Internet

2 Answers

How to install d link 802.11G wireless access


Hi,
Connect modem lan cable to Router Wan / Internet port. From Router Lan port you can either connect your system or switch . wireless : Scan for wireless network from your wireless system. If it shows, connect to your wifi network
Thanks

Mar 25, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

The installation wizard is not recognizing the router. When plugged into the modem, the internet is fine. No firewalls are blocking the router. Tried different hardware cords, did not fix the problem. ...


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi Then save settings and restart router Then connect cable from internet service provider to WAN port of router and connect ethenet lan cable from computer to lan port of router. . Let me know if you need further assistance. Thanks for using FixYa.

Nov 27, 2010 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Connection issue


Hi! I believe your having some issue with your router and I will be more than glad to assist you in this concern..Time warner cable is your isp and if the computer is connected directly to the modem, you have a perfect internet connection but if you are going to connect the cable from your modem to the router and you connect your computer to port 1 to 4 of your router it will not give u an internet connection. This is what we are going to do.
1. connect your computer that can get an internet connecttion thru time warner cable to the router on port1.
2. pull up a browser and type in the default gateway of the router, to check the default gateway of the router, right click the network icon on the lower right of the task bar and click status and it will show the ip address, subnet and default gateway, ex the default gateway is 192.168.1.1, u are going to type in the default gateway ip address to the url of the browser.
3. It will ask u for the username and password, by default the username is admin and the password is 1234 or just leave it blank.
4. It will pop up the setup page of the router and you have to look for the setting for doing a mac clone, you need to clone the mac address of your pc that can connect to the internet thru time warner cable modem.
5. once its done, save the settings and on the internet connection settings, manualy configured it to auto-dhcp. save the settings.
6. once its done..unplg the power of the computer, router and modem.
7. cable connection should be, cable from the modem goes to the WAN port of the router and connect cable on port 1 of the router to your computer on the lan port.
8. Plug in 1st the power of the cable modem, once all lights are lit then plug in the power of the router, once all lights are solid on the router, like the power, WAN, u will notice that there is no light on the port1, computer is still off, once the computer is on port1 will lit, then power on the computer..once computer is completely boot up, pull up a browser and it should gives u an internet connection.
9. Once you have an internet connection, u can access again the setup page of the router to setup the wireless connection settings.
10. If you are going to connect another to the existing router that is conneted to the time warner cable. that is possible, but before u connect the 2nd router to the 1st router..
a. connect the 2nd router to a computer to set it up..you have to access the setup page of the 2nd router.
b. once you access the setup page, there is a menu for the lan settings that is for the router side. u need to change the 3 octet of the ip address of the 2nd router. ex your 1st router ip address is 192.168.1.1 and the 2nd router ip address is 192.168.1.1 to change the 3 octet of the 2nd route, the 2nd router ip address should be 192.168.2.1. then save the settings..
c. the router will reboot and need to access the setup page of the router by using the 192.168.2.1 and u can set the wireless connection settings.. once its done..
d. cable connection should be---cable from the time warner cable goes to the WAN port of the 1st router, connect a cable to port 4 of the 1st router going to the WAN port of the 2nd router.. this process is called cascading two routers on a network.. this should work.. good luck

Aug 16, 2009 | ViewSonic (DHWMG120) Router

1 Answer

D-Link DI-534 Starting up problems


Try resetting the router . Press the reset button for 10 seconds and after 10 seconds unplug the power cable but continue pressing the reset button for another 30 seconds after 30 seconds plug in back the power cable and continue pressing the reset button for 10 seconds and release it after 10 seconds.

try to open an Internet browser and type in 192.168.0.1 on the address bar. It should give you the DLink page. Once you have that configure your connection.

Jan 08, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

D-LINK DI-514 LAN Ports not working


  1. Connect a cable from your PC to one of the four plugs. Not the WAN port.
  2. Setup the wireless the way you want it.
  3. Then give this router a different IP, like 192.168.0.2
  4. Then you have to disable the DHCP server in the router (keep in mind now you have to set your desktop or laptop that is conencted to it to a static IP to still communicate with the router)
  5. Once this is done just plug you existing network into one of the four ports. Not the WAN port.
  6. It will now act as a wirelessa access point.
Althoug this is doable it is not recommended as this router is a pile of **** and the wireless is crappy.

I would suggest a dedicated wireless access point.

Dec 06, 2008 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Need to connect router to deck top.comp.


This might work for you. Now to go in and configure the router thats something totally different.
To physically install the router
Step 1: Connect the power adapter Connect the power adapter to the router and plug it into an electrical outlet not controlled by a wall switch.
Step 2: Connect the router to the computer Disconnect the ethernet cable that is connecting the broadband modem to the network adapter in the computer. Connect the ethernet adapter in the computer to one of the LAN ports on the router.
Step 3: Connect the router to the modem Connect the ethernet port on your broadband modem to the WAN port on the router.
Step 4: Check link lights and connections
Check the front of the router to make sure the Power, WAN and LAN1 lights are on.

Jun 29, 2008 | Computers & Internet

2 Answers

Vonage does not work with D-Link router


If you plugged a telephone into your D-link router, unplug it - that can not work!
You have to plug your vonage router (WAN port) into the D-Link (LAN port) and connect your phone to one of the LAN ports of the vonage router.

If you do not need the wireless capabilities of the D-Link, you can simply take that one out and only use your vonage router.

If you need more help, I would need more details form you:
Which vonage adapter are you using?
How is your setup (i.e. modem -> D-link -> vonage & computers)
What connections are you using (wire/wireless)?

You can also find help here.

Jun 17, 2008 | D-Link DI-704P Router

1 Answer

Router not working at all


This is a problem with the router, those signs are just telling you that the router has some problem, try to press and hold the reset button for 30 seconds and after that unplug the power of the router and run the setup CD for it to reconfigure the router...

Jan 04, 2008 | Dynex DX-E401 Router

2 Answers

Routers


I don't understand what you want to do. I need specific details of what you want your network to do.

Nov 02, 2007 | Computers & Internet

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...