Question about OEM Systems Bluetooth Headsets - Model BTCC1357A Headset
I have a motorola KRZR and bought a new bluetooth device AOEM gw bt 002 from tesco and i have no users guide for the device, and i need to know how to pair/bond the device with my phone. please can you help me.
Switch on the headset as normal. Then press + & - keys together for about 2 secs until light flashes quickly alternately red and blue. get your mobile to search for a device, when found, enter code 1234. That's it!
Posted on Jun 23, 2009
i posted a manual for this here
Posted on May 14, 2009
Solution OK thank you. Just hold down +/- i 2 sek and it works
Posted on Nov 19, 2009
From what I can tell and after researching the same issue it is the
KRZR. I called both Verizon tech support and my bluetooth tech support.
There is no solution
If you notice some of the functions in the Blue tooth Pairing/connection menu functions don't even work. (The on off for instance and the settings) After it is paired. I tried my bluetooth with other phones and it works fine.
I am going to the Verizon store to complain untill i get a different model.
In short the KRZR software is defective
Posted on Feb 15, 2008
I have an iPhone 3G 8g. The solution for pairing is: turn the headset on until blue light flashes every second or so, then press the power button and the - button on the volume for 2 secs, the power button and blue button will flash alternatively red and blue. Turn the bluetooth on via settings>general>bluetooth the iPhone will then pick up the divise. Enter 1234 on the phone and it will pair.
Posted on Jan 10, 2010
Just switch the headset on then put the phone on .
go to application or tools on your phone and switch the bluetooth on.
now select search for divce while you press the middle of the +and- switch on the headset for few seconds,your phone will find it .
now press connect on your phone if asked for pin enter either 0000 or 1234 it will pair definitly
Posted on Jan 22, 2011
I don'y know if this will help anyone who's still struggling but with my AOEM GW-BT-002 You have to press the + and - volume button together immediately after you switch the device on (whilst the Blue light is still solid). If you do not catch it in time turn off then on again and hope you're fast enough :)
Posted on Jan 21, 2011
Try turning the KRZR's bluetooth on then hold down either the button on the front or the volume control (i can't remember which) for about 5 seconds
Posted on Jan 09, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: bluetooth to mobile pairing
Push and hold both vol(+) and vol (-) at the same time for approx 2 secs. The headset will falsh green and red lights. Get your phone to search for bluetooth devices. It should find the headset. Enter pairing code 1234 in phone. Done
Posted on Jul 13, 2008
The mamual says to hold the - and + volume keys at the same time for approx. 2 seconds till the light starts to flash green and red. The pairing code is 1234
Posted on Aug 26, 2008
Tips for a great answer:
Dec 26, 2013 | Motorola Cell Phones
May 24, 2010 | Motorola Cell Phones
Sep 01, 2009 | Motorola Mobility H500 Headset
Apr 20, 2009 | Sony Ericsson Cell Phones
Feb 14, 2009 | Plantronics Explorer 330 Headset
Dec 14, 2008 | Motorola Mobility HS850 Consumer Headset
Apr 19, 2008 | Radio Communications
Mar 31, 2008 | OEM Systems Bluetooth Headsets - Model...
Jan 05, 2008 | OEM Systems Bluetooth Headsets - Model...
Jan 26, 2011 | OEM Systems Bluetooth Headsets - Model...
Nov 20, 2017 | OEM Systems Bluetooth Headsets - Model...
Sep 30, 2008 | OEM Systems Bluetooth Headsets - Model...
7,137 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: