Question about Dishwashers

1 Answer

Dishwasher stopped mid programme

Whirlpool DWF416W service no. 854241615710.
Yesterday the programme was set but dishwasher stopped mid programme. I openedthe door and the 2 green indicator lights in the door for 'start' and 'selectedprogramme' were off but then came on and go off as the position of the door ischanged by opening and closing it. There was water in the bottom of thedishwasher. I closed the door and the machine started again water was emptied.

Today I reloaded it and set programme, it filled with water, rinsed, releasedsoap tablet then stopped. The tablet is lying on the bottom of the dishwasher.There is water in the bottom of the dishwasher.
The 2 green indicator lights were off when I opened the door but then came onagain but go off when the door is fully closed.
There must be power or the green indicator lights wouldn't come on at all.
Can you help please? It seems to me like it might be the switch in the door??

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 90 Answers

First place I would go is the door switches, make sure the dor switch assembly is not broken, and switches working.

Posted on Jan 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My old Whirlpool DU8500X stopped yesterday in mid cycle and now will do nothing. Standing water in bottom. Tried breaker reset already.

If it is a top loader, a whirlpool normally has a fuse in a cartridge holder inside the top panel. Once panel is opened, trace the power wires, and look carefully for the fuse cartridge holder. Replace it. This fuse normally protects overloading of washing so as not to damage motor.If the fuse is good, then try and bridge the door limit out for a short while to ascertain if that is the problem. Please let me know.

Oct 02, 2009 | Dishwashers

1 Answer

We have a Whirlpool ADG 7560 dishwasher which has recently started playing up. When switched on for a normal wash, after a short time the machine starts to beep. If you open the door the green programme...

Sounds like something is becoming intermittent, but after the system warms up, the connection "holds." These are difficult to troubleshoot until the unit actually stops working. If the unit is in warranty or you have a service contract, it's definitely worth a call to your service center and schedule a home visit.

Sep 21, 2017 | Dishwashers

1 Answer

Rotating programme unit stops mid cycle, all programmes

according to that i think the problem come from timer after you fix this problem pleas donot select your program during conncting electrical power thankyou

May 27, 2009 | Whirlpool AWM5145/2 Front Load Washer

1 Answer

Dishwasher stopped mid-cycle

you have a bad thermal fuse in the control panel. it's the whit thing with 2 wires going to it

Sep 07, 2008 | Whirlpool 24 in. DU1100XTP Built-in...

2 Answers

Whirlpool ADG 957. Light for rinse programme on but start light flashing intermittently. Cannot change programme, cannot start machine.

Mine was doing exactly the same. I turned off power, held down the 2 black buttons on right, switched back on and the start button flashes intermittently. It then allowed me to change programs, just testing it now!! It started, this was more then it was doing!! lol

Aug 17, 2008 | Dishwashers

1 Answer

Whirlpool dishwasher stopped mid cycle

My whirpool dishwasher model ADP4601 is flashing a green light three times and is not doing anything else - any suggestions

Aug 10, 2008 | Dishwashers

1 Answer

No Power

You probably have a bad door switch assm, there is no reset on this unit, if you have a bad door switch the unit thinks the door is open so it won't start.

Jul 15, 2008 | Whirlpool 24 in. DU900PCD Built-in...

2 Answers

Whirlpool GU2548 green light flashing, nothing working

I have had the same problem with my the same dishwasher. The manual says that "the dishwasher has malfunctioned. Call service to check heater element". I called service and they are saying that replacing the heater element and possibly the electronic panel may be required. Total cost (part + labor) = $350-400!! I am very very upset with Whirlpool right now.

Jun 11, 2007 | Whirlpool 24 in. GU2548XTP Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

78010 Answers

Brad Brown

Level 3 Expert

16854 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides