Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson DC07 loss of suction

My dyson has lost its suction, It hovers ok when i use the hose, I have taken the hover apart and checked all filters, they seem ok. But still doesnt hover up.
Any suggestions?

Posted by on

  • Anonymous Jan 06, 2008

    drive belt burning and breaking

  • Anonymous Mar 29, 2014

    I have a loss of suction when the brush rotating attachment is fixed. I have taken it apart and checked it. There are no breakages. I have also cleaned it. It spins off and on but very slowly. I have tried a similar, smaller attachment but have the same problem.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 372 Answers

Hi.

Check brush roller is spinning when vacuuming.
Check short clear hose under machine for rips & blockages.


http://dysonmanuals.llc.nu/

Chris..

Posted on Jan 05, 2008

  • Monique Spivey Feb 13, 2014

    i have checked my solution and the brush roller is not spinning round

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi loss of suction on Dyson DC07 and I have changed the belt on the brushbar and cleaned all filters/removeable parts but still suction not very good, any other suggestions?


Check for a clog where the power nozzle connects to the hose. Clogs or leaks in the hose will both cause loss of suction/air flow. Another possibility is broken or worn out fan blades.

Nov 13, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson Animal with no suction from floor brushes


Check the canister seal for dirt or gaps. This is normally where the vacuum leak is.

May 14, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Power Loss - Suction Loss


Hi
Its cutting out because its overheating.
Change the filters and check the base and the hose for blockages

Feb 14, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson suction loss


make sure the filters in the bottom are clean, then remove the canister and you will need to clean it thouroughly, pay close attention to the upper section inside where the "cones" come togetheri have read that they are prone to clog up here and lose suction, google dyson suction loss or how to clean a dyson ect...pay attention to getting the rod that releases the bottom to dump back in the correct place or it will not work right. a few write ups tell about this!

Jan 31, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

5 Answers

Dyson blowing top of cyclone air release valve.


It sounds like the same problem I was having. I had loss of suction through he hose then all of the air was coming out through the vent/valve on top of canister. If you are looking at your dyson from the back, look at the bottom. You will see a purple plastic tab on the bottom left. That allows you to remove the plastic u-shaped hose that goes from the hose to the bottom of the dyson. I just removed that and found it was completley blocked. I removed it and the dyson has no loss of suction orair through top valve/vent. I hope this helps. I never post but i'm just excited that I got my dyson working perfectly again.

Jul 08, 2008 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

Hose wont go back in place?


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=34170&thid=375422
Hose won’t go back in place?
Posted by marbles12 on Jan 29, 2008
I have a Dyson DC07 and have used the hose but now I can’t get the hose park to click back into place so the hover handle is coming away
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Dyson DC07 All Floors Bagless Upright
Once you hose starts to breakdown there is really nothing you can do other than replacing the hose. This is true on almost every vacuum on the market because they are using in most case the plastic hose and the heat and the product you pickup breaks down the hose and starts to lose its strength and starts to collapse. You may want to check with your local vac dealer to see if he has a new one or a good used one for ½ the price. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.dyson.com/homepage.asp
Contact Us
1-866-MY-DYSON
(1-866-693-9766)

Dyson Customer Care is available 7 days a week.
· Mon - Fri: 7am - 8pm, CST
· Saturday: 8am - 6pm, CST
· Sunday: 9am - 6pm, CST
questions@dyson.com
Thanks, Don – The Vac Man
Go Ahead. Use Us.

Jan 29, 2008 | Dyson DC07 All Floors Bagless Upright...

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

508 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...