Question about Lexmark P4350 All-In-One InkJet Printer

1 Answer

Ink cartridges i put in a compatible ink cartridge but it still shows empty?

Posted by on

1 Answer

Re: ink cartridges

Maybe a generic same thing happened with my P4350

Posted on Jan 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When I put a new Black ink in my Canon MX452 it shows my black as empty


if the black cartridge is genuine and new...take it back. It is faulty.
If the cartridge is refilled or compatible...hold the STOP button for 6+ seconds to disable ink monitoring. This should clear the 'empty' error and the printer should work again.

good luck!

May 17, 2014 | Canon PIXMA Printers & Copiers

1 Answer

Put in a compatible red ink cartridge but no red ink printed. Can't put in the original cartridge in to verify the printer as it is detected as empty. However, for other colors that I replaced with same...

So, is the new cartridge "compatible", or is it not as compatible as they claim?

Try a "genuine" replacement cartridge.

Start the software that came with the printer.
There is a "ink-jet test" utility, and a "head-cleaning" utility.
Run each of them, to see if anything is "clogged".

Dec 05, 2009 | Printers & Copiers

1 Answer

The printer tells me to replace an ink cartridge because the ink has been depleted. The cartridge is nearly new, though. Just yesterday it showed to be half full. I have cleaned the printheads and the...

There is a chip on your cartridge that communicates with the printer to estimate how much ink is left in the cartridge. When the chip thinks the cartridge is empty it will refuse to print any more pages no matter how much ink is left in the cartridge. These cartridges are only estimated to print "up to 840 4" x 6" photos, or 80 13" x 19" photos." If it showed half full yesterday and then you put through a large print job it is very likely the cartridge is empty. In any case once the chip thinks it's empty the cartridge needs to be replaced.

Nov 09, 2009 | HP Photosmart Pro B9180 InkJet Printer

1 Answer

My refilled ink cartridge still displays empty and will not print

The ink cartridge is most likely chipped & you would not be able to reset the ink level. Purchase an original or a good compatible cartridge. Refiling newer cartridges is not a good idea.

Oct 21, 2009 | HP Photosmart C4180 All-In-One InkJet...

1 Answer

Problem with replacing color ink cart. #5

Is it the right Cartridge you are trying to install please check and then check if the sensors are working.

Mar 31, 2009 | Lexmark X2600 InkJet Printer

4 Answers

Epson Stylus CX7400 Ink Light Problem

You need to open up the maintenance window and go thru the motions that you are changing the cartridges and this resets the ink levels back to full and sends data to the printer saying that they are full and the ink light disappears and it prints fine !!!

Just changing them doesn't seem to do the trick like on a lot of printers

Jan 26, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Canon pixma mp210 printer - replaced ink cartridges with compatible ones - printer working fine except when printing both ink lamps come on solidly, not blinking, and status says there is no ink in...

Dear merryan,

This printer uses FINE cartridge which has memory chip inside that store ink level data. Once the cartridge is EMPTY we cannot restore this data to be FULL even though we physically refill ink until FULL. So the printer keep displays NO INK warning.

Similar with using compatible cartridge, NO INK warning still remain because ink level data has been recorded as empty. Why?. Here is the explanation. As far as I know no third party compatible cartridge produced this printer since canon protect it with the chip. Compatible cartridge that sold in the market is refurbish cartridge which repacked with another brand.

To fix this problem we need to deactivate ink level detection function by holding down STOP/RESET button for about 9 seconds or more for each cartridge. The consequence of this is ink level become UNKNOWN.
Hope this will be helpful to you



Nov 08, 2008 | Printers & Copiers

1 Answer

Canon pixma mp210 and compatable ink cartridges

Try pushing the reset button for about 5 seconds. This has worked for me.

Oct 27, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Epsom stylus CX4700 won't print - new ink cartridges installed

They cut costs on Epson compatible cartridges by using low quality ink and chips or not resetting the chips at all. Sounds like you got cartridges that the chips were not reset on so your printer thinks all the cartridges are empty. I own a Cartridge World ink refilling store and I would never recommend purchasing compatible Epson cartridges from anyone. I would buy refills of Epson brand cartridges and make sure the seller reset the chips.

Oct 18, 2008 | Epson Premium Compatible** Inkjet...

2 Answers

Installing new cartridges and showing empty

Is this a genuine Brother cartridge or a compatible/refilled cartridge? Inside, at the rear of the cartridge there is flag which when full blocks a sensor in the machine indicating the cartridge is full - with some compatible and refilled cartridges the flag may not be set correctly so the sensor sees that there is no ink in the cartridge. As a temporary fix place some black tape over the rear of the cartridge where the sensor arm is.

Sep 09, 2007 | Brother Multi-Function Center MFC-240C...

Not finding what you are looking for?
Lexmark P4350 All-In-One InkJet Printer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers


Level 3 Expert

18259 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides