Question about 2wire (1000-400108-001) Router

1 Answer

Homeportal 1100 how can i get setup disk dvd ? how much does it or they cost?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 64 Answers
Re: homeportal 1100

If you connect with an ethernet cable, you don't need any additional drivers at all. You just need to have a browser connected to » and a product key. The 2Wire has a built-in wizard which you can access with the browser, and it will guide you through the setup. The product key is obtainable from a number of sources, including the 2wire web site, although you should look to your ISP's web pages first if they provided the 2Wire.

If you don't have an ethernet adapter on your computer, you might want to consider purchasing one of those inexpensive ethernet cards. Ethernet seems to have a lot fewer problems than the USB route.

Posted on Jan 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Friend gave me internet 2wire do not have security code how do i get it

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Mar 13, 2011 | 2wire HomePortal 1100 Router...

1 Answer

Wht should i do if im not connected

  1. Disconnect the HomePortal power adapter from the wall socket.
  2. Reinsert the power adapter plug directly into the wall socket.
  3. Remove any power strips or surge protectors temporarily to ensure that these items are not preventing proper operation of the HomePortal.

      Make sure that you are using the power adapter that came with your HomePortal.

  4. Plug the power adapter into a different wall socket in another room.
  5. Press the red factory reset button, if available.
You need to have at least one computer connected to the HomePortal that is able to access the main GUI ( You can do this by either running the HomePortal Setup Wizard software (included with your HomePortal) and following the on-screen instructions, or manually configuring the network adapter for DHCP and obtaining an IP address from the HomePortal.
Determine the type of broabdand network access assigned by your ISP. Your choices are: PPPoE/PPPoA or RFC 2684 (Direct IP).

Dec 22, 2010 | 2wire HomePortal 1000 Router

1 Answer

I am wanting to Open some ports for a game what do it do

Download Routing Commander program from, it will automatically forward ports and setup the router. Another option is go to router's web interface and set up it manually according to router's User Guide.

May 20, 2010 | 2wire HomePortal 1100 Router...

1 Answer

Homportal 1100 not allowing connections

Try this support page - I believe this applies to your device, and you can download both diver and manual.

Mar 24, 2010 | 2wire HomePortal 1100 Router...

1 Answer

My friends computer died and needs to setup her new computer to manage the Homeportal 1000hw. Is the software/drivers available on the web?

Try the following link:

If your HomePortal is still configured to defaults try to use the web base interface.

Dec 03, 2008 | 2wire HomePortal 1000HW DSL Modem and...

2 Answers

Linksys to homeportal

In order for you to make the linksys wireless router and the homeportal 1100 to work together they should be connected via CAT5/ethernet cable, you cannot connect them wirelessly...

Oct 26, 2008 | 2wire HomePortal 1100 Router...

2 Answers

Hg1000 home portal

do you mean the modem's ip address?
http://homeportal/setup (software version 3.7.x and higher) (software version 3.5.x or earlier)

hope this is the one you're looking for...?

Apr 06, 2008 | 2wire HomePortal 1000HG DSL Modem and...

1 Answer

Trying to use port forwarding

i tried to remote access your modem using the serial nos. but it didn't give me anything, pls try to run system setup wizard from your computer by accessing or homeportal/setup, once you have configured the modem with your own settings, please let me know and i'll try to open some ports for you

Mar 23, 2008 | 2wire HomePortal 1100 Router...

1 Answer

Trying to hookup a wireless router to HP 1100

DSL uses PPOE, which may be different than what you had previously. Cable, for example, uses TCP/IP.
Re-set the router to defaults, and follow the instructions for PPOE, which should be in your manual or setup disk. Your ISP may have this info on their site, or you can get it at the Netgear site:

Oct 17, 2007 | 2wire HomePortal 1100 Router...

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Routers Experts

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Bob S

Level 1 Expert

15 Answers


Level 3 Expert

2072 Answers

Are you a 2wire Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides