MAGNAVOX DVD/VCR/TV COMBO/MODEL NUMBER------ MWC24T5B

Usually when that happened for me, it meant that one of my small children had also put a foreign object in the slot where the VHS tape goes. Any type of obstruction will cause the VCR to jam and force the television to shut off.

problem solved thank you, I will contact you if there is anymore problems

Forgot?
Output of VCR/DVD to input of TV.

I've found the center LED in the VHS player faulty with those symptoms. Change it you'll be fine. Larry

code is 0247

check out this diagram, paying close attention to the audio video cable hookups.

assume the cable tv box represents the converter box

you are going to come out of the converter box audio and video outputs into the new magnavox dvd/vcr combo audio and video inputs.

Then out of the new magnavox dvd/vcr combo outputs to the inputs on the tv if it has such inputs. The TV will have to operate on the video input 1 or 2 if the tv has such a thing, use the remote for the tv to adjust the input signal to line in 1 or 2 depending on what it has.

If the tv has no coaxial input or audio video inputs then you might have to use an adapter, you can get these from radio shack.

You say it will not record from the tv, but in all actuality the dvd vcr combo is getting the signal from the converter box not the tv, do you understand what I mean here?

So the dvd vcr combo gets input from the converter box so you will have to set it to view signal from the line input you have plugged in from the converter box. line 1 or 2 or whatever the input is.

the tv will have to be set on the line input to view the signal from the dvd vcr combo.

That is as easy as I can put it. Study the diagram closely. You will see what I mean.

THE CABLE OR ANTENA NEED TO SCREW INTO THE INPUT OF YOUR UNIT THEN A SMALL WIRE OUT TO THE TV FROM YOUR UNIT PUSH RECORD WHEN SHOW IS ON TV !SO ITS CABLE INTO VCR INPUT THEN CABLE FROM OUTPUT OF VCR TO TV ....TV ON CHANNEL 3 AND VCR UNIT ON CHANNEL 3

Is simply. get the audio/vido cables and look on the back of the TV and connect from the audio video outputs from the combo to the audio video inputs on the tv. remember the colors of the terminals and connect them that matches the red, white (audio) and the yellow (video). Using the remote locate the button "input" or "source", and select video 1 or 2, depending where you connected it.

your model is "tuner free" that means it does not have the RF screw in connector. Buy one that has a tuner, preferably both ATSC(USA digital) and NTSC(USA analog)

Connect the AV output of the Sky box to the AV input of the Panasonic combo.Look at rear of the Combo and you will observe input and output RCA connections.Using RCA leads, hookup the Av output of the Panasonic to the audio/video input of the Sony tv. Power up Appliances, and you should be OK.