Question about Brother LS-2125 Mechanical Sewing Machine

1 Answer

Stiching the stiches do not grab the fabric evenly(simetrical) between top and bottom. Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Stiching

It sounds like a thread tension problem. Find the knob for the tension and play around with it (look for instructions in the manual). If that doesnt work it might be the bobbin thread thats too lose in which case I would take it to the store or a repair service and have them show you how to do it.

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Machine was working stiching, went to stich another piece of fabric and no stiches

Hai, You try to change a new needle Otherwise you take the small waste piece stitched after change the another piece of fabric start a stitching.

Apr 25, 2014 | Sewing Machines

1 Answer

When iam stiching the bobbin thread is not interlocking with the pool thread ,the straight stich is not stiching properly

Do you have thread in your bobbin?
Is your needle fully inserted in the needle bar?
Is it the right needle for the machine?
Is your needle damaged, bent or dull?

Jul 26, 2012 | Singer 7470 Computerized Sewing Machine

1 Answer

Trouble with the stiching on a juki7800

try changing the needle, make sure the needle is the correct one for the fabric being used
also adjust top thread tension

Apr 16, 2012 | Juki DDL-8700

1 Answer

Stitching is too loose

hi! this particular problem is common when tension and stiches adjustment does not match and complied to fabrics your trying to sew,there a is hard way to find manual specialy to old ones. but if you want it may help you some i got here on manual sears 1803.if your control look similar to this in figure5180e2c.jpg there are stitch control one for straight stitching and one
on special stitching.the small dial near needle is tension dial.You can set tension on # 3 to 5
stitch dial as in figure7a4913a.jpgif you are
sewing a straight stiches set to # 8 to 12 trial are needed somtimes to acquired smooth sewing,Be sure no mechanical problem regarding in machine operation.try to sew a cotton fabric for trial then if sewing another fabrics sudden adjustment should be done.If your machine is equipted by auto tension just select on the fabrics.well small information can sometime helpfull ...nice sewing

Mar 18, 2009 | Kenmore Sewing Machines

1 Answer

Brother XL2230 Elastic Overlock function not working properly

First of all check your needle size and utility, for the tension machine it must be the same on top and bottom example pull the top thread and the lower thread they must be the same.
When sticthing the elastic you must devide the amount of elastic versus the fabric : dise the amount before stiching
Hope this will help
Good day

Feb 16, 2009 | Brother XL-2230 Mechanical Sewing Machine

1 Answer

Brother LS-2125 presser foot stuck

i bought a new brother stiching machine ls2125. when i started to stich the same no stiching is coming only the mark is coming. why?

Sep 24, 2008 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

I can't seem to ever get the tension right on my "singer simple". no matter what i do, the stiching is a problem. this is my second machine with the same problem, is this a mfr defect or...

Probably operator error. Make sure the machine is threaded right, make sure the bobbin is threaded properly, change the needle.... even though you think the needle is sharp. Make sure you are using the right thread. If you have bargain thread, throw it out. Use Coats & Clark, which is still reasonably priced. My friend has a lower end Singer that was acting up ... loose threads on the bottom of the fabric, which means upper tension .... we did the simple thing of changing the thread. It worked, and the machine is sewing beautifully.

Apr 14, 2008 | Singer 3116 Simple

3 Answers

Sewing Problem

I have the exact same problem! I cannot figure out what is wrong with it! I see that no one has responded to your problem, have you found a solution yet? If so, please let me know what you did to fix your machine! It is really annoying! Thanks!

Apr 09, 2007 | Brother LS-2125 Mechanical Sewing Machine

Not finding what you are looking for?
Brother LS-2125 Mechanical Sewing Machine Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers


Level 3 Expert

18257 Answers

Irene Tulloch

Level 2 Expert

429 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides