How To Split A Plastic Drum ? I have an Ariston AVXL105 with a failed bearing. I have removed the drum but how do you split the plastic drum ?!. There is a central seam but there are no bolts, it appears it has been press fitted. Levering the seam with a screwdriver I think will surely damage the seal. Many thanks for any advice
I washed 2 bath mats and the washing machine didn't spin them out. I imagine they were too heavy but...
(More)
I washed 2 bath mats and the washing machine didn't spin them out. I imagine they were too heavy but the machine made a buzzing sound. I took out the mats and am running a regular load to see what happens. If it won't spin, what do I do?
Catistrophic failure, bearings,motor & belt self destructed. UNit only 2 years old. This is...
(More)
Catistrophic failure, bearings,motor & belt self destructed. UNit only 2 years old. This is rediculous & I guess Frigidaire's quality in todays market. The solution cost more than a new one.
when the washer is at the final rinse cycle the drum just goes back and forth then a very low speed...
(More)
when the washer is at the final rinse cycle the drum just goes back and forth then a very low speed spin. The belt is intact, I do not hear the spin motor cycle through at all. I can see the motor turning but again very low speed
Frigidaire FTF530FS front load washer-was idle for a year, now when put in cycle(normal) it will...
(More)
Frigidaire FTF530FS front load washer-was idle for a year, now when put in cycle(normal) it will fill, spin slowly one direction then the other,then do nothing.