Question about Texas Instruments TI-84 Plus Calculator

Hello. I own a TI-84 plus, and also have one from my school. I keep one at school and one at home. However, my personal calculator does not graph 2 problems at the same time (on the same set of axis.) . Im not sure what is wrong with it. Thank you for your help in advance.

-Cid

Re: Will Not Graph 2 eqations on one set of axis.

Mine did the same thing and i had to reset it. hit 2nd and then the plus key to bring you to the memory menu and hit 7 for the reset. Then press 2 for defaults. That should fix the problem. If not press 1 for All Ram under the reset menu. Hope this helps

Posted on Jan 13, 2008

On the x-axis (horizontal axis) represent the time variable. On the y-axis (vertical axis) represent the temperature.

Mar 03, 2014 | Texas Instruments TI-84 Plus Calculator

If it is just a matter of not seeing all points, just set the zoom to **ZoomStat.**

Oct 06, 2013 | Texas Instruments TI-84 Plus Silver...

If the table has been created by entering a function in the Y= editor, then you can generate the table by just inserting the function again and pressing Table or Graph. If it is some (statistical) table you entered manually and where you chose the x and the corresponding y, then you will have to retype it again. Sorry

Sep 12, 2011 | Texas Instruments TI-84 Plus Calculator

You need to fix your graph so that it shows the correct y-axis and x-axis.

It works best if you press the zoom button and then scroll to find the ZoomFit option.

Then the graph should show up.

It works best if you press the zoom button and then scroll to find the ZoomFit option.

Then the graph should show up.

Jun 15, 2011 | Texas Instruments TI-84 Plus Calculator

Press the Zoom Key and select ZoomStd (or Zoom Standard).

Jun 11, 2011 | Texas Instruments TI-84 Plus Calculator

did you put one in each of 2 y =???

Also, check your window to make sure the numbers fit the x and y values in both graphs

Also, check your window to make sure the numbers fit the x and y values in both graphs

Mar 24, 2010 | Texas Instruments TI-84 Plus Calculator

Hello,

Reset the calculator RAM and retry. Some old configuration settings are giving you the error.

Hope it helps.

Reset the calculator RAM and retry. Some old configuration settings are giving you the error.

Hope it helps.

Sep 28, 2009 | Texas Instruments TI-84 Plus Calculator

Jun 13, 2009 | Texas Instruments TI-84 Plus Calculator

Press the 2nd Button then the ZOOM button. Make sure that AxesOn is highlighted. If not, move your cursor down until you on AxesOn and press ENTER.

If AxesOn is highlighted, then it is probably your window. Press ZOOM, then 6.

If AxesOn is highlighted, then it is probably your window. Press ZOOM, then 6.

Jun 03, 2009 | Texas Instruments TI-84 Plus Calculator

First click on the Y= button and enter an eqation or goto stat and hit enter and type the points. Afterwards goto Y= then hit plot1 so it is highlighted and hit zoom and then zoomstat and you will have grphed your points.

Mar 02, 2009 | Texas Instruments TI-84 Plus Silver...

127 people viewed this question

Usually answered in minutes!

It worked! Thank you so much!

×