When I turn the camera on, the view finder is blank or black. When I click to take a picture, it goes through the motions, but the picture is blank/black. I can view my saved photos on the memory card though.
Sounds like a bad CCD sensor. I've seen the same problem in several brands of digital cameras (Canon & Sony). Better off replacing rather than repairing.
Was this helpful?
Yes
No
Popular Solutions for Olympus SP-310 Digital Camera
When switched on no image is displayed on the screen, even if click a photo it still comes as blank...
(More)
When switched on no image is displayed on the screen, even if click a photo it still comes as blank as on screen. all the camera setting/modes are working but no image. can somebody pls advice is it problem with lens or chip? thanks!
i have taken some picture but accidentally i didn't press the memory card in properly so the...
(More)
i have taken some picture but accidentally i didn't press the memory card in properly so the pictures are on my camera i have no cable to get the photos onto the computer any ideas if i can transfer the pictures from my camera to a xd card so i can view them on the computer?
My Olympus SP310 camera will not take pictures. when I turn it on to take a picture the screen is...
(More)
My Olympus SP310 camera will not take pictures. when I turn it on to take a picture the screen is white (blank) It is not the display because I can view the pictures that I took a while ago and stored on the camera
Camera is on but no image in the viewfinder.Shutter and flash work but no picture!! Batteries are...
(More)
Camera is on but no image in the viewfinder.Shutter and flash work but no picture!! Batteries are fresh.Reset to factory default...nada! I am able to view previous photos form the "quick view" button, but when I press this button again to go back to the viewfinder/monitor no image.Help!!