We have a GE PROFILE Dishwasher PDW9200 which is now about 6 years old. About 2 years ago, stopped working, had circuit board replaced. Worked well for a while, then lights on door stopped working; was unable to use unless I slid a butterknife in with the door closed and pressed the start button. (All other functions were blank, so I do not know what cycle I was initiating). We had a brief power outage, and after that, there is a constant buzz coming from the dishwasher and I can't get it to work. Time for a new dishwasher?
hello. thanks for choosing fixya. honestly I do recommend that you get a new one. By the time you get your current one repaired you will have almost as much money in it as a new one and you will miss out on lots of things the new ones offer now such as: much more efficient use of power, much more efficient use of water, much quieter. and a much better wash. Regards, J.
Comments:
Nov 05, 2009
- hello. thanks for choosing fixya. honestly I do recommend that you get a new one. By the time you get your current one repaired you will have almost as much money in it as a new one and you will miss out on lots of things the new ones offer now such as: much more efficient use of power, much more efficient use of water, much quieter. and a much better wash. Regards, J.
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
I was hoping for some magic answer, but I think he is right, time for a new dishwasher!
" - jklapping
Popular Solutions for GE Profile PDW8400J Built-in
getting error codes G5 and G4 Have GE profile built-in dishwasher no manuel - was in house when we...
(More)
getting error codes G5 and G4 Have GE profile built-in dishwasher no manuel - was in house when we bought it
My GE Profile dishwasher has dirty water sitting the bottom and will not run? What should I be...
(More)
My GE Profile dishwasher has dirty water sitting the bottom and will not run? What should I be looking at to solve?
I have a GE Profile Quiet Power II, the latch has jammed and will only go 1/2 way. I can't close to...
(More)
I have a GE Profile Quiet Power II, the latch has jammed and will only go 1/2 way. I can't close to run it. Any suggestions?