Question about Alpine CDA-9833 CD Player

1 Answer

No Sound the player has power and seems to work but there is no sound to the speakers. it was working well previously, but suddenly lost its sound. any suggestions on how to fix the problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

99 times out of 100 the audio is (a.k.a. "chip" ) is defective.

I would pull the radio apart, get the number off of the ic(it should be a big 10 or more pin part.. get the number off of it..

go to www.mouser.com, www.digikey.com, check ebay, or see if alpine will sell you one directly..


most common cause if the failure it a shorter speaker or shorted speaker wiring, so check all that over very well before you reinstall your deck!!!!

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor works perfectly, but after a recent crash of my comp. Ive lost all sound ..The comp doesnt seem to recognize the build in speakers..


The computer does not have to recognize the powered speakers that are built-in the monitor, the computer feeds the analog audio signal the powered speakers inside the montior, there is no driver needed either, but you do need the PC sound card driver for you to get sound through any powered speakers (either the desk top powered speakers or the one inside the montior).
Since your computer had crashed, the driver for the sound card may be have to be reloaded.
You can verify if the monitor speakers are working or not by feeding it with an MP3 player or sound output from CD player.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

May 14, 2011 | BenQ FP72E 17" LCD Monitor

1 Answer

Subs not responding to Sony CDX-GT500


you cna switch the working rca's to the sub out put to check for sound if u get sound it means your rca's are bad but if no sound then your other outputs in your radio may be deffective

Jun 12, 2010 | Sony CDX-GT500 CD Player

1 Answer

My rear and center speakers suddenly quit working. No sound


try a different source. if there is output on all speakers in test mode, then the amps are good but the source or source switching may have a problem.

Mar 01, 2010 | Audio Players & Recorders

1 Answer

New speakers do not work. Lime green cable


Re-starting the PC won't do anything for the speakers. The PC can't see them! What it can see is the sound device, card or on-board chip. If you had a previous pair of speakers working on the same connection, it seems unlikely that your sound device is to blame. Try slowly removing and re-inserting the plug a few times whilst some music is playing to see if the sound suddenly comes on. Some of these plugs are not too good at making connection! If this is unsuccessful get back and I will take you thro' proceedure to check your sound device. Ian. P.S. Take it the power light is on the speakers?

Sep 20, 2009 | Cyber Acoustics CA-2012 Computer Speakers

2 Answers

No sound at laptop speaker but audio output is ok


I have lenovo notepad 3000n100 with winXP sp2.
I downloaded realtek audio from ibm site and installed.
Now sound is coming at my output port but the in-built laptop speaker is not giving any sound output.
The hardware is ok as the sound was coming at in-built speaker before formatting. The previous audio driver set up file i have lost.
Plz help.

Apr 16, 2009 | Lenovo 3000 N100 CoreDT2080 VB PC Notebook

1 Answer

Lost sound (no changes to computer)


Check the speaker connection - should be plugged into the green jack on back of PC. Do your speakers have a power light to indicate they are on? Check power cable.

Dec 09, 2008 | HP (153147-001) Sound Card

1 Answer

Infinity 3.5c , 2 powered Woofer 5.25" suddenly no sound.,


The woofers on my 3.5c stopped working, but with mine the light was off. I unplugged it and left it for about 24 hours and then plugged it back in and it worked. No idea why. It's happened twice and each time takes at least 12 hours or a day or so before it'll work again, just unplugging it for an hour won't do it.

It seems like both times the problem started when the speaker got unplugged without it being shutoff first, but I can't confirm.

But if your light is still on it's probably a different problem. With my 4.1t towers when the light was on but there was still no sound it equated to numerous fried amp components which cost about $150 for repair.

Oct 31, 2007 | Infinity Intermezzo 3.5C Center Speaker

3 Answers

Lost sound on DVD


I have a CH-DVD 300--not sure how different it is from the 200, but I have the same problem. Putting in an audio CD seems to do the trick, and is less hassle than unplugging (which also works for me).

May 20, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Alpine CDA-9833 CD Player Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4932 Answers

hoyzee1

Level 2 Expert

150 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

300 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...