Roper RAX4232KQ Top Load Washer
Problem for Roper RAX4232KQ Top Load Washer

How do I removethe lint? Clothes are coming out




By bkomishin on Nov 05, 2009

" "
How do I removethe lint? Clothes are coming out with fluff...

Clarification Request

Posted by emissionwiz on Nov 05, 2009

are u serious u really don't know why this is happening??

Solution #1

posted on Nov 05, 2009
Not Rated)

mindreader

Rank: Guru 
Rating: 87%, 141 votes
Sorry for the obvious.....
Fluff on the cloths is from the lint trap not capturing it from the air flow.
Air is passed into the clothes from the laundry room. It is heated and then passed over the clothes... then filtered air is forwarded to the outside exhaust.

If you are seeing lint on your clothes, then the air coming in from your laundry area is not lint free.
1. check the back/bottom of the dryer for lint accumulation.
2. Remove the lint trap and clean out the duct work.
3. Inspect all the flooring and areas around the dryer for dust/lint - and clean any that you find.

I believe that you will then have a clean and dry load.
The proceedure of cleaning described above should be repeated every 6 months or so....
-Jim
Comments:

Nov 05, 2009

- Sorry for the obvious.....
Fluff on the cloths is from the lint trap not capturing it from the air flow.
Air is passed into the clothes from the laundry room. It is heated and then passed over the clothes... then filtered air is forwarded to the outside exhaust.

If you are seeing lint on your clothes, then the air coming in from your laundry area is not lint free.
1. check the back/bottom of the dryer for lint accumulation.
2. Remove the lint trap and clean out the duct work.
3. Inspect all the flooring and areas around the dryer for dust/lint - and clean any that you find.

I believe that you will then have a clean and dry load.
The proceedure of cleaning described above should be repeated every 6 months or so....
-Jim

Nov 05, 2009

- Sorry for the obvious.....
Fluff on the cloths is from the lint trap not capturing it from the air flow.
Air is passed into the clothes from the laundry room. It is heated and then passed over the clothes... then filtered air is forwarded to the outside exhaust.

If you are seeing lint on your clothes, then the air coming in from your laundry area is not lint free.
1. check the back/bottom of the dryer for lint accumulation.
2. Remove the lint trap and clean out the duct work.
3. Inspect all the flooring and areas around the dryer for dust/lint - and clean any that you find.

I believe that you will then have a clean and dry load.
The proceedure of cleaning described above should be repeated every 6 months or so....
-Jim
Was this helpful?
Yes
No

Popular Solutions for Roper RAX4232KQ Top Load


Questions and Unsolved Problems for Roper RAX4232KQ Top Load


Do you recommend Roper RAX4232KQ Top Load Washer?
Answer

Answer
This is a RAX4232K00 washer. It makes a grinding strange noice when going thru the wash cycle and... (More)

Answer
roper model rax4232kq1 washer has filled but will not complete cycle

Answer
This is a direct drive setup no belt. Took out motor transmission as one unit. Found lots of burnt... (More)

Answer
won't spin, found rubber dust on top of gear case. any ideas what caused this.


Didn't find what you were looking for?

Describe your problem:

Select a Category:







Ask our Experts

 

Solve Your Problem Now!
Chat Live with an Expert
Chat Now
Top Washing Machine Experts



Top Washer & Dryer Repairmen

(877) 477-7278
Washer and Dryer parts delivered overnight...
AppliancePartsPros.com

(800) 357-1234
Welcome to Action Appliance Repair. We have...
jay_action appliance repair


       
Solve Your Problem Now!
Chat Live with an Expert
Chat Now

Insert Link
Insert Image
Insert You-Tube clip
Insert List
Insert List
Spell Check

What is this?



Select