Question about Hotpoint WMA32 Front Load Washer

1 Answer

Hotpoint WMA32 Front Load... Problem:

Hi, My Hotpoint WMA32 washing machine will not rev up to the high speed spin on full load. Is there a drive belt slipping and is it a DIY job? Robert.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 121 Answers
Re: Hotpoint WMA32 Front Load... Problem:

If its not your belt its the brushes in the motor that need replaced i would replace the brushes first the cost about £15-20

Posted on Mar 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The only problem I have is I need to know how much weight this washer takes - Hotpoint WMA32 bought in 2003

Page 11 of the manual states that tha maximum load is 5.5Kg cotton

Recommended load for synthetics is 3Kg

If you need a copy of the manual, you can download one here:

Sep 21, 2011 | Hotpoint WMA32 Front Load Washer

1 Answer

My washing machine is not spinning I have a WMA40

on this machine i would check motor wires and motor itself ie motor brushes

Jun 07, 2011 | Hotpoint WMA32 Front Load Washer

1 Answer

Washer will not empty


Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


Sep 04, 2010 | Hotpoint WMA32 Front Load Washer

1 Answer

Hotpoint WF220P has become very noisy during spin, especially at high revs. Can it be worn brushes or motor, or bearings? Otherwise all is OK.

Remove drive belt, and spin drum by hand, if it feels rough or noisy, then the main drum bearings are worn.
If no noise from drum, could be a motor prob.
Please rate ,my solution.

Nov 02, 2009 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

The machine washes but will not spin

wife had set on no spin so set to 800rpm's and pressed reset button. machine now fully functions again.

Sep 05, 2009 | Hotpoint WMA32 Front Load Washer

1 Answer

Hotpoint Aquarius WMA32 - belt slipping off?

Probably it wasn't fitted properly. make sure the belt is tight when fitted, and at least 2 groves from either side at the motor shaft.

Jul 25, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Brushes the motor on spin does 1 of 3 things 1- does not start you here it trys to turn but stalls 2-does a very quick spin (3secs)then stops 3- goes gradually up to spin speed, when it approches full...

sounds like part of one of the bushes is trapped in the motor,take motor off and by turning around a bit may just drop out,as i had to repair a washer with the same problem,rgds,paul.

Jul 07, 2009 | Hotpoint WMA32 Front Load Washer

2 Answers

Hotpoint Aquarius WMA 32

please check the outlet hose of the detergent drawer. it could be clogged with soap.

Feb 13, 2008 | Hotpoint WMA32 Front Load Washer

Not finding what you are looking for?
Hotpoint WMA32 Front Load Washer Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 1 Expert

5 Answers


Level 1 Expert

47 Answers


Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides