Question about Flat Panel Televisions

Open Question

Pioneer elite pr-1010hd plasma tv

Tv will not power on. red led power light flashes 3 times I have a Pioneer PDP-508XD which is about 3 months old and when I try to turn it on the red light flashes three times, stops, and then repeats the sequence over and over. I hope this isn't a common fault as I sell them for a living and I've installed about 100 already! What's wrong with it? Any ideas?

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

I have a pioneer pdp-r05XE, on the plasma, the light flashes green and red alternately whilst on the receiver it flashes green 6 times. I can't get the tv to turn on...

Unplug if you have not done so BOTH units from power for several minutes (any cable or satellite box also connected.

wait several minutes and restore power to all units which may allow them to reboot.

Cannot hurt and may help.

Dec 06, 2012 | Flat Panel Televisions

1 Answer

Pioneer Elite. Loud popping sound and picture disappeared

Power supply board is dead.The board where the power a/c cord plug into it.Replace the power supply board.Tries websites like, to buy a refurbish power supply board for the replacement.

May 30, 2010 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Pioneer PDP 4330HD display flashes red LED 4 times


Just seeing if you had resolved the problem as my mum's Pioneer PDP-433HDE which she bought back 2002 has developed this same fault.

It has been a perfect TV and done very well with plenty of good use, but I have a feeling the cost of repair - even if it is possibale will be costly.



Mar 13, 2010 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

Red LED lights

power supply shot ... sometimes x board or y board

Oct 02, 2009 | Pioneer PureVision PDP-5030HD 50 in....

2 Answers

Loud pop and tv went off...

Here is a solution from the Pioneer web site:
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):
  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Aug 09, 2008 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer pro800hd plasma just made a loud pop and then went to black the power button(red led) is flashing. power supply??, flyback xformer??? any ideas. worth fixing??

The affected models of consumer plasmas are listed below. Anyone who owns or uses one of these models may contact Pioneer through its toll free hotline at 800-421-1404 to arrange for the free, in-home upgrade. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken. If consumers are not sure if their plasma is affected, they should call the toll free hotline for confirmation.
Consumer Plasma Models (13 listed): PDP-505HD PDP-4330HD PDP-503PU PDP-4300 PDP-5030HD PDP-4304 PDP-5031HD PDP-4310 PRO-1000HD PRO-800HD PRO-1000HDI PRO-800HDI PDP-433PU

Dec 30, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Pioneer PDP506-HDG plasma tv

The 3 blinks ( i assume they're blinking in red) means a scan assy problem. Check the scan A & B boards and the Y drive board. Something is shorted and loading down the Vscan voltage of the power supply.


Dec 19, 2007 | Pioneer PureVision PDP-4340HD 43 in....

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides