At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Are there hidden panels (I am looking for beige or...
Im not entirely sure, but I think they stopped putting those extra panels in there. www.applianceart.com has a ton of options including stainless steel for your dishwasher.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have two options for you to consider. One is to take your panel to any sheet metal fabricating shop and have them make a stainless steel version for you. The other is to get a spray can of stainless steel appliance paint and apply it. i have used the stainless steel paint on entire appliances with excellent results.
LOOK ON THE OUTER EDGE OF PANEL FOR ANY SCREWS, IF NONE ARE FOUND IT MAYBE THAT THERE ARE PLASTIC STUDS BEHIND PANEL SO TRY TO PRIZE IT OFF BUT BEWARE, THE PANELS SPLIT VERY EASY
You need to look behind the internal door handle with which you open the door, the internal door handle with which you pull the door shut, below the door pocket, and if there is one fitted, behind the little "tweeter" speaker by prising off the front.
You may also find some around the edge of the door panel.
My Neff integrated dishwasher has two holding screws in the top corners and then two hidden screms half way down the side behind plastic covers. Loosen these side screws, remove the top two corner screws and then the door cover/panel should lift out of two lugs at the bottom.
×