Question about Acer Aspire One PC Notebook

2 Answers

NC6320 No power

I have a NC6320, there is no power when plugged in. The fans, lights nothing comes on. I have tried new cords, resetting memory modules. Nothing. Any ideas?

Posted by on

  • 1 more comment 
  • Anonymous Oct 16, 2008

    Same here. No power. No lights. Nothing. Everything reset. CPU issue? Heatsink?

  • mrtopz Nov 18, 2008

    Same problem here - the charging LED flashes a couple of times (orange, as in "battery empty") when the battery is taken out and re-inserted, but neither charging nor starting up with or without battery seem to work.  We just bought a new cable, but that didn't help either.


    Does anyone have a solution?  Is there a way to reset the BIOS or wherever the setup information is stored without booting?  Some key combination?  Please help!

  • Arfa05 Nov 30, 2008

    I have same problem (NC6320), there is no power when plugged in. The fans, lights nothing comes on. battery and adapters are tested and fine. but i here the beep sound in the adapter as soon as i connect to laptop. does nay one have any idea how to resolve?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 32 Answers

Hi Friends,
Problem with
Acer Aspire Notebook Or Laptops? Just visit the sites..
For any Software problem you can visit a link by just Click Here .
For any Hardware problem with this Notebook you can Click Here

12d12s

Posted on Jul 19, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 238 Answers

Hi, have you checked the power adapter, if the output voltages are ok then remove the laptop battery and then try to power on, let me know

Posted on Jan 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I RESET THE TABLET...I HELD POWER BUTTONM ON FOR ABOUT 5 MINUTES.. MADE SURE I HAD POWER (BATTERY AND POWER CORD PLUGGED IN) STILL NOTHING BUT THE WORD ANDROID APPEARS AND IS LIGHTED FROM LEFT TO RI


If you are trying to do a factory reset then you need to press the volume up button and then the power button until you get the page that allows factory reset comes up!

Oct 25, 2014 | Proscan 8" Tablet with 4GB Memory

1 Answer

Have a gateway mt3423 when i power on no display i have already bought new memory 1 gig ddr pny removed battery held power button put memory in top and bottom slots still nothing but power light steady on...


You could have memory problem, incompatible RAM or faulty RAM.
Are the RAM the same make and model?
Try inserting one RAM module one at a time to determine the faulty RAM.
When one RAM module works, then insert the 2nd RAM module to see if it works, Swap RAM around in the RAM slots.

Dec 10, 2010 | Dell Inspiron 1525 Notebook

1 Answer

If I open and close the printer it starts as if it is doing printer prepeartation, but nothing comes on. The screen will not turn on.


  • SOLUTION 1 If the HP All-in-One is turned off, press the On button to turn the unit on.
  • Unplug the power cord from the back of the HP All-in-One.
  • Wait 15 seconds.
  • Plug the power cord back into the HP All-in-One.
  • Turn on the HP All-in-One by pressing the On button.SOLUTION 2: Reset the power module and test the power Step one: Reset the power moduleThe power module has a safety feature inside that protects the product during a power surge. If you experienced a recent power surge, the power module might need to be reset. Use the following steps to reset the power module.
    1. Unplug the power supply from the rear of the product.
    2. Unplug the power cord from the electrical outlet, power strip, or surge protector.
    3. If the product uses a power module with a detachable power cord, disconnect the cord from the power module.
    4. Wait 15 seconds.
    5. Reconnect the power cord to the power module.
    6. Plug the power cord back into the electrical outlet. Do not use a power strip or surge protector.
    7. Check to see if the power module has an LED.
      • If the power module does not have an LED, continue to the next step.
      • If the power module has an LED, check to see if the LED lights up.
        • If the LED does not light up, contact HP to replace the power module. To buy a compatible power module, right-click the following link, How to Buy HP , and then click Open in New Window .
        • If the LED lights up, continue to the next step.
    Step two: Test the power on the All-in-OneFollow these steps to test the power on the product.
    1. Reconnect the power supply to the rear of the product.
    2. Press and quickly release the Power button (c01602202.gif ) to start a Power On/Off cycle. Do not hold the button down.

  • Apr 07, 2010 | HP Photosmart C6180 All-In-One InkJet...

    1 Answer

    My cricut won't turn on ... no light, no sound, nothing. Checked to make sure it was completely plugged in and into a working outlet. Is there any way to check to see if I need a new power cord (hate to...


    Yes, in that case you have to replace a new power cord, or try to observe the power supply of your system unit, if the fan is working then your memory is the cause, and if the fan is not working your power cord is the main cause of it.

    Feb 03, 2010 | Computers & Internet

    1 Answer

    Acer Traverlmate 3260 no power


    Hi,
    If it doesn't work off the battery either.
    The connection inside the Pc has gone,
    $150/$200 to be repaired.

    Will be good then

    Regards
    Richard.

    Apr 22, 2009 | Acer TravelMate 3260-4874 Notebook

    1 Answer

    Dell Inspiron 8500 no lights, no fan, nothing.


    First remove the battery and try it. If it works without the battery, then that is the problem. My Inspiron 2650 suddenly started acting like that with the battery in but works perfectly without the battery.

    Whenever you replace a battery ALWAYS let it completely charge BEFORE you try to use the computer with the battery in place.

    Do the POWER, DISK ACTIVITY and/or BATTERY CHARGING light stay on?

    If so try powering the computer off; unplug the power cord; remove the battery; carefully remove the RAM modules; check the connections for corrosion/dirt; them reinsert the modules; close up the case; plug the power cord in and try powering it up without the battery inserted to further eliminate the battery as the problem.

    If you get NO lights or fan noise without the battery installed, you probably have a mother board problem, most likely in the power switch. With the 2650s the switch is an integral part of the motherboard (DELL calls them system boards I believe) and DELL recommends replacing the board. I guess if you can find someone brave enough to work on the board, you could fix the switch because DELL refurbishes them and if the board isn’t working anyway, then you have nothing to loose.

    I hope this helps you. Good luck. The 8500s are good computers if you get enough memory in them.

    Don Jones

    Jan 25, 2009 | Dell Inspiron 8500 Notebook

    1 Answer

    New Motherboard & Processor not working


    Usually this symptom has to do or with memory modules with problems or the VGA adapter (integrated) could be damaged. First try to reset the BIOS of *********** taking out the battery and using the reset jumpers informed in the Mother Board manual. Then put the battery and the jumpers back to the factory default position and try again.
    If this doesn't work, try to plug the power cord to another 220V as the ground could cause this type of problems.
    You can also try to install another VGA adapter to check if you receive the VGA signal in your monitor.
    Hope it helps...
    Please tell us about your progress.
    Best regards
    Eduardo

    Oct 04, 2008 | Computers & Internet

    1 Answer

    Won't turn on


    *Unplug the AC cord
    *Remove the battery
    *Locate the memory cover on the underside of the notebook
    *Unscrew the one or two screws securing the memory cover, and lift up to remove the cover
    *Gently slide (away from one another) the metal retaining clips that hold down the module.
    *The module should pop up
    *Remove the module
    *Reinstall the module (removing and reinstalling the module is apparently enough to rectify the contacts)
    *Replace the module cover and the battery
    *Attach the power cord
    *Try to power up

    Jan 21, 2008 | HP Compaq Presario V2000 Notebook

    2 Answers

    Acer travelmate 292elcI problem starting


    Hi, sorry to hear you are having problems. When this happens it usually suggests that the CPU/system board has failed. If the laptop is still under warranty I would suggest taking it back because this is something that will be covered and they should be able to fix it or replace the laptop itself. If not you may have to pay to have the system board/CPU replaced. Good luck and hope this helps. Si :)

    Sep 26, 2007 | Acer TravelMate 292ELMI Notebook

    Not finding what you are looking for?
    Acer Aspire One  PC Notebook Logo

    Related Topics:

    337 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Acer Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18424 Answers

    Mohammed Ebrahim M
    Mohammed Ebrahim M

    Level 3 Expert

    644 Answers

    Alun Cox

    Level 3 Expert

    2678 Answers

    Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...