Programs will not run on my TI-83 Plus calculator. The screen reads "error archives". I have tried deleting all of the programs and putting them on again. All of the math functions still work. No games are on it.

Re: TI-83 plus graphing calculator

This can easily be fixed. An Archived program can't be deleted or run. So you just have to unarchive it. hit "2nd" then "+" then go down to where it says "Mem Mgmt/Del" and hit enter. then hit all. There should be a "*" next to the program you can't run. now just hit enter and in a couple seconds it will be unarchived and the * will go away. Then you can delete or run that program. Hope this helps alot. Good luck

Posted on Jan 10, 2008

Re: TI-83 plus graphing calculator - Texas Instruments TI-83 Plus Calculator Calculators

Thank you so much!!! it is working fine!

Posted on Jan 13, 2008

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Dec 04, 2010 | Texas Instruments TI-83 Plus Calculator

Please Install Calculator Software Now error

This message means that the operating system has been corrupted. These steps will allow you to update the OS.

Unit to Unit

• Connect two TI-83 Plus units by means of the data cable (short black cable that was prepackaged with the TI-83 Plus)

• Make sure that at least one of the TI-83 Pluses contains the current Operating System

• Select [2nd] Link

• Select "Send OS" option from the Link menu

• Make sure that the other unit still reads "Waiting Please Install"

• The OS should be downloading.

From the Computer

• Make sure you have the latest version of the TI Connect™ Software

• Download the latest version of OS for the TI-83 Plus to the desktop of the PC.

• Connect the appropriate TI-GRAPH LINK™ cable between the PC and TI-83 Plus.

• Since the TI-83 Plus is currently off, the TI-83 Plus will automatically turn on when the TI-GRAPH LINK Cable is inserted.

• On your computer, choose Start, Programs, TI Tools, TI Connect, TI OS Downloader.

This message means that the operating system has been corrupted. These steps will allow you to update the OS.

Unit to Unit

• Connect two TI-83 Plus units by means of the data cable (short black cable that was prepackaged with the TI-83 Plus)

• Make sure that at least one of the TI-83 Pluses contains the current Operating System

• Select [2nd] Link

• Select "Send OS" option from the Link menu

• Make sure that the other unit still reads "Waiting Please Install"

• The OS should be downloading.

From the Computer

• Make sure you have the latest version of the TI Connect™ Software

• Download the latest version of OS for the TI-83 Plus to the desktop of the PC.

• Connect the appropriate TI-GRAPH LINK™ cable between the PC and TI-83 Plus.

• Since the TI-83 Plus is currently off, the TI-83 Plus will automatically turn on when the TI-GRAPH LINK Cable is inserted.

• On your computer, choose Start, Programs, TI Tools, TI Connect, TI OS Downloader.

Dec 10, 2007 | Texas Instruments TI-83 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

May 17, 2010 | Texas Instruments TI-83 Plus Calculator

Press [2nd][+] to access (MEM)ory management. Select [7:Reset][1:All Ram][2:Reset].

Calculator answers "Ram Cleared". Press [CLEAR] key or any key to get the main calculator screen.

By resetting the Ram you will lose any information that is not archived (data in lists, defined functions, graphs, etc.)

Calculator answers "Ram Cleared". Press [CLEAR] key or any key to get the main calculator screen.

By resetting the Ram you will lose any information that is not archived (data in lists, defined functions, graphs, etc.)

Mar 09, 2010 | Texas Instruments TI-83 Plus Calculator

I tried all possible situations where one would get an error ERR: ARCHIVED 1:QUIT 2:GOTO in relation to graphing, and I was unable to do so. Thus I cannot explain your error (in relation to graphing). I conclude that the error is unrelated to the graph.

As a general rule, one you get message ... 1:Quit, 2:GOTO press 2 and you will be shown the location where the offending symbol is.

Anyway, to graph functions, always deactivate the statistical plots

As a general rule, one you get message ... 1:Quit, 2:GOTO press 2 and you will be shown the location where the offending symbol is.

Anyway, to graph functions, always deactivate the statistical plots

- Press [2nd][Y=] to access (STATPLOT) then press [4:PlotsOff]
- Command PlostOff echoes on main screen.
- Press [ENTER], calculator answers Done.
- Open the [Y=] editor to enter your function and
- Press [GRAPH].
- If you do not see any graph,

- press [ZOOM][6:ZStandard] or
- adjust the window dimensions by
- pressing [Zoom] and
- setting the Xmin,Xmax,Ymin,Ymax values
- making sure that Xmin is less than Xmax, and Ymin is less than Ymax.

Feb 28, 2010 | Texas Instruments TI-83 Plus Calculator

To fix that problem, you have to delete all of the applications/programs, I forgot which. I had to do it on mine and I could graph anything after, but it deletes everything in your calculator, including your games.

Jan 26, 2010 | Texas Instruments TI-83 Plus Calculator

Hello,

Read the following answer from the TI Knowledge Base.

Hope it helps.

*How can I troubleshoot an Error in Xmit error message when transferring data between two graphing calculators?
*

The*Error in Xmit*
error message is returned when a connection cannot be established
between two calculators when attempting to transfer data. There are
several factors that can contribute to this error message.

• The calculators being connected are not compatible for data transfer.

• The data cable is not firmly connected to both units.

• The receiving calculator is not in receive mode.

• The I/O port on one of the graphing calculators is damaged.

**The procedure for connecting two graphing calculators is as follows:**

• Connect the data cable to the I/O port of each unit. The cable will fit tightly in the I/O port and snap into place. If silver from the cable is visible, the cable is not properly connected.

• Access the Link menu on each unit

• Place the receiving graphing calculator on "Receive"

• Place the sending unit on "Transmit" or "Send" from the Link menu.

Once the data has been selected, the transfer will commence accordingly.

**The data transfer protocols for graphing calculator** **is as follows:**

• TI-73 - Link allows data sharing with another TI-73, TI-82, TI-83, and TI-83 Plus.

• TI-82 - Link allows data sharing with another TI-82.

• TI-83 - Link allows data sharing with the TI-82, TI-83 family calculator, and TI-84 Plus family calculator.

• TI-83 Plus/TI-84 Plus family- Link allows data sharing with another TI-82, TI-83 family calculator, and TI-84 Plus family calculator.

• TI-85 - Link allows data sharing with another TI-85(To a TI-86. Not From a TI-86).

• TI-86 - Link allows data sharing with another TI-86 and from a TI-85 to a TI-86.

• TI-89 family- Link allows data sharing with another TI-89 family calculator and from a TI-92 family calculator.

• TI-92 family- Link allows data sharing with another TI-92 family calculator and from a TI-89 family calculator.

• Voyage™ 200 - Link allows data sharing with another Voyage 200 and TI-92 family calculator.

If the cable does not fit properly into the I/O port, or if the I/O port appears to be damaged (broken or separated plastic, obstruction inside the port), call 1-800-TI-CARES (1-800-842-2737) M-TH 8:00 AM - 7:00 PM FRI 10:00 AM - 7:00 PM Central Standard Time to speak to a representative or sending an email to ti-cares@ti.com.

Read the following answer from the TI Knowledge Base.

Hope it helps.

The

• The calculators being connected are not compatible for data transfer.

• The data cable is not firmly connected to both units.

• The receiving calculator is not in receive mode.

• The I/O port on one of the graphing calculators is damaged.

• Connect the data cable to the I/O port of each unit. The cable will fit tightly in the I/O port and snap into place. If silver from the cable is visible, the cable is not properly connected.

• Access the Link menu on each unit

• Place the receiving graphing calculator on "Receive"

• Place the sending unit on "Transmit" or "Send" from the Link menu.

Once the data has been selected, the transfer will commence accordingly.

• TI-73 - Link allows data sharing with another TI-73, TI-82, TI-83, and TI-83 Plus.

• TI-82 - Link allows data sharing with another TI-82.

• TI-83 - Link allows data sharing with the TI-82, TI-83 family calculator, and TI-84 Plus family calculator.

• TI-83 Plus/TI-84 Plus family- Link allows data sharing with another TI-82, TI-83 family calculator, and TI-84 Plus family calculator.

• TI-85 - Link allows data sharing with another TI-85(To a TI-86. Not From a TI-86).

• TI-86 - Link allows data sharing with another TI-86 and from a TI-85 to a TI-86.

• TI-89 family- Link allows data sharing with another TI-89 family calculator and from a TI-92 family calculator.

• TI-92 family- Link allows data sharing with another TI-92 family calculator and from a TI-89 family calculator.

• Voyage™ 200 - Link allows data sharing with another Voyage 200 and TI-92 family calculator.

If the cable does not fit properly into the I/O port, or if the I/O port appears to be damaged (broken or separated plastic, obstruction inside the port), call 1-800-TI-CARES (1-800-842-2737) M-TH 8:00 AM - 7:00 PM FRI 10:00 AM - 7:00 PM Central Standard Time to speak to a representative or sending an email to ti-cares@ti.com.

Oct 22, 2009 | Texas Instruments TI-83 Plus Calculator

Hello,

Reset the memory to defaults and you will not get the error.

[2nd][MEM][7:Reset][Defaults] [2:Reset] [ENTER]. Press [CLEAR] and them [Y=] to enter the function. No need to set Zoom. Defaults work fine for y1= 4X+3.

Press [GRAPH].

Hope it helps

Reset the memory to defaults and you will not get the error.

[2nd][MEM][7:Reset][Defaults] [2:Reset] [ENTER]. Press [CLEAR] and them [Y=] to enter the function. No need to set Zoom. Defaults work fine for y1= 4X+3.

Press [GRAPH].

Hope it helps

Sep 26, 2009 | Texas Instruments TI-83 Plus Calculator

Check the links below:

*TI*-*83*-*Plus* Calculator Basics Tips and Techniques

*TI*-*83* GUIDEBOOK

Part II:*Texas Instruments TI*-*83*, *TI*-*83 Plus* Graphics Calculator **...**

Getting Started with the*TI*-*83* and *TI*-*83 Plus* Graphing Calculators

INTRODUCTION TO THE*TI*-*83* AND *TI*-*83 PLUS* Basics

Getting started*Texas Instruments TI*-*83* and *TI*-*83 plus* calculators

Calculator Notes for the*TI*-*83* and *TI*-*83 Plus*

*Texas Instruments*. *TI*-*83 Plus* graphing calculator - Guidebook **...**

Part II:

Getting Started with the

INTRODUCTION TO THE

Getting started

Calculator Notes for the

Apr 19, 2009 | Texas Instruments TI-83 Plus for Biology...

How do I fix my Ti 83 calculator's window range error and do the graph?Because without that fixed I can't do my graph atall.

Oct 19, 2008 | Texas Instruments TI-83 Plus Calculator

140 people viewed this question

Usually answered in minutes!

I went thru all of the instructions and at the very end there were no stars in front of the programs. Some programs I had previously deleted had stars, but not the ones not working. Also if this helps, when it reads "error, archives", I click on "go to" and the "A" of the "input A" near the beginning of the program is flashing.

×