Question about Linksys Wireless-G WRT54G Router

1 Answer

How to uninstalling the Linksys Wireless-G WRT5aG Driver

I am having a problem setting up a personal SSID id for my wireless. I am told I need to uninstall and reinstall the router on my pc. How do I do that?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 107 Answers

A SSID is from (underline from) the router. Go to administrate your router. In there will be a tab for management. In the box for SSID enter one you like; refrain from you house number, phone number, etc.

On your pc, double click on the wireless icon by your clock On the right it will say "change order of prefered networks", click on that. In the new window, look on the right again. DELETE all the networks you see; then close. Get back to the wireless network window you first opened. Find your SSID. Click connect. If you put WEP or WPA on the router you will need to enter the password at this stage.

Bingo, done.

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Coda qoy


Sir

Checking or verifying the wireless settings of your Linksys Cable Gateway is important when connecting wireless devices to your network. This is the best route to take if you are unsure of your gateway's wireless settings.
The wireless settings that you need to take note of are:
  • SSID
  • SSID Broadcast
  • Wireless Security
To check the wireless settings on the Linksys gateway follow the steps below:
Step 1:
Access the gateway's web-based setup page. For instructions, click here. If you are using a Maccomputer to access the cable gateway's web-based setup page, click here.
Step 2:
Click the Wireless tab.


5682da5f-6535-493f-b593-1a4613d0bf71.png

Step 3:
Look for Wireless Network Name (SSID). It is recommended to change the SSID to something unique.


2479d228-df03-4dad-b49e-d0853affbc66.png

Step 4:
Click the Wireless Security sub-tab and take note of the current Wireless Encryption Level and the Wireless SSID Broadcast if it is set to Enable or Disable.


cbadfb12-af13-4b26-b67d-c33f9c0a78ce.png

If Wireless Encryption Level is set to No Encryption, this means that the wireless security on the gateway is disabled.
If Wireless Encryption Level is set to 64 Bit Encryption or 128 Bit Encryption, check the value under Default Key and take note of the Wireless WEP Key that corresponds to it.


8d41b9fe-5011-4083-9d48-3157bff16e69.png

I hope Your problem is Linksys router Problem is solved by now, In case You still need Linksys Router Help Then I Suggest you follow official Linksys Router Support URL Website mention below :
Linksys Support

Or

In case You still need online Linksys Router Support Then follow us On for Linksys Router Support

Mar 27, 2014 | Linksys WCG200 Router

1 Answer

How to create a personalize WEP Key or Password in Linksys WRT120N Wireless Router


To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 29, 2013 | Linksys Computers & Internet

1 Answer

How to supply a personalize WEP Key or Password in Linksys WRT120N Wireless Router


To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 29, 2013 | Linksys Wireless-G WRT54G Router

1 Answer

How to install driver for linksys wireless-g


To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jun 28, 2012 | Linksys Wireless-G Broadband Router

1 Answer

How do i setup my wireless linksys model wcg200?


The wireless settings that you need to take note of are:
a. SSID - this is the name of your wireless network
b. SSID Broadcast - an indication if your SSID is showing on the list of networks available
c. Wireless Security - serves as the password for your wireless network

To check the wireless settings on the Linksys router, follow the steps below.
Checking the Wireless Settings on the Linksys Router
Step 1:
Access the router's web-based setup page. For instructions, click here. If you are using a Mac computer to access the web-based setup page, click here.
Step 2:
When the router's web-based setup page appears, click Wireless.
4678-009.png Step 3:
Look for Wireless Network Name (SSID). If it's still set to "linksys", change it to something unique then click 6-4680.jpg NOTE: Take note if SSID Broadcast is Enabled or Disabled. If it is Enabled, it means your SSID will show among the list of wireless networks available when any wireless device will search for a network to connect to. If it is Disabled, it will not be visible.

4678-003.png
Step 4:
Click the Wireless Security subtab and take note of the current Security Mode.
4678-001.png
If Security Mode is set to WEP:
4678-007.png If Security Mode is set to WPA:
4678-013.png You can change your WPA shared key if you want to personalize it. It should be a minimum of eight and a maximum of 63 characters long.
Step 5:
Click 3695-017.png

If you need more help come back.Post / thumbs / testimonial are welcome!
.

Nov 23, 2010 | Linksys WCG200 Router

1 Answer

I pushed the reset button on my router and now I have no protection from others with my wireless, how can i protect that?


by default ip address of linksys is 192.168.1.1
to star config you need to be connected with ethernet cord rj-45
or conenct via wireless by conencting to linksys on wireless

admin user: blank
admin pws: admin

*choose a protocol on your linksys router on internect conenction type:

check isp protocol :
dhcp: needs serail number of mac address
it picks up automatic
pppoe: needs username and pws from isp

*the ip address has to be diferent from the isp modem:
isp modem 192.168.1.1 linksys 192.168.1.1 incorrect
isp modem 192.168.1.1 linksys 192.168.2.1 correct
change the ip on lan settings on your router

*wireless: ssid by default is linksys
ssid: linksys
wep : none
to setup wireless
access the wireless basic
change the ssid to any network name
enable the wireless password
choose wireless security
enable wep key 10 digit hex pws
make shure you saved settings on every setting

May 04, 2010 | Linksys Wireless-G Broadband Router

2 Answers

Set ssid for wrt54gs


You do that in the router setup an SSID is simply a "Name" that You give it. You log into the router, 192.168.1.1 use admin/blank and admin as login & password..once in the router you set it up with the wizard.

here is a manual to help you.
http://www.retrevo.com/support/Linksys-WRT54GS-Wireless-Routers-manual/id/421ci076/t/2/

Feb 23, 2010 | Linksys WRT54GS Wireless Broadband Router...

1 Answer

Trying to use belkin router with linksys adapter cards..do i need new drivers


You need to configure the Belkin router with a SSID and WAP or WEP encryption, Then install the Linksys adapter driver in the computer and then configure the Linksys adapter with the Belkin router settings (ie. the SSID and encryption) before the Linksys can communicate eith the Belkin router.

Aug 02, 2009 | Linksys (WIFIDESKTOP) Wireless Adapter

2 Answers

Win98, Linksys USB Adapter, 2wire router... no internet


hi!
sorry if it took a while to get an answer to your question...

anyway, let's begin by ensuring that you have completed installing the drivers & software of your wireless adapter.

launch the linksys wireless program by clicking on the icon for the linksys on the system tray or generally, this can also be launched from the programs menu after clicking on the windows start button.

on the main screen for the linksys, there are 3 tabs: link information, site survey & profiles. select the profiles tab

on the profiles screen, click on the new button to create a new profile. name the profile with a customized ID & click ok.

under choose a net type, select infrastructure mode. enter the SSID (this is your customized ID created on the new profile) & click next.

under network setting select obtain an IP address automatically (DHCP) & click on next.

under security settings choose "disabled" for WEP and leave the rest of the fields blank.

confirm the settings by clicking on yes.

note: you don't need a driver for your 2wire router, ensuring that the 2wire is already working with the ethernet connection.
also make sure you are able to see your devices on the mdc page, go to homeportal/management, local network> device list.

i assume that the mac g4 is able to connect wirelessly to this 2wire modem, am i correct?

please let me know if you have any issues... we'll work this one out, ok?

Apr 16, 2008 | 2wire (1000-400108-001) Router

1 Answer

Linksys Wireless N adapter Missing Hardware.ID


Hi Kathy,

Please do this first. go to control panel>add/remove programs, uninstall the Linksys Wireless N adapter.DO NOT UNPLUG THE WIRELESS ADAPTER FROM THE PC. Insert the Linksys wireless N adapter cd(DO NOT RUN THE SET UP). If the set up wizard shows up CLICK exit or cancel.Restart the pc with the disc in and the wireless adapter connected. When the pc boots up you will see the found new hardware wizard. Continue with the wizard, Select No not this time, Select install software automatically. If this is successful, your pc should be able to detect your wireless network

Mar 10, 2008 | Linksys WRT300N Wireless Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...