Question about Sony Grand WEGA KF60DX100 60" Rear Projection Television

1 Answer

Ghosting Although slight, ghosting is evident especially when viewing a very good HD signal. The service manual says that there are no convergence adjustments but I read a thread on another website that indicates that there are some procedures that will solve this problem. Any clue?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Sounds like it needs to be calibrated.
how to calibrate, please see the following links where it is well explained.

Posted on Jan 04, 2008

  • Cary Farah
    Cary Farah Jan 10, 2008

    send me your emai laddress i have a fix



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Removing ghosting on a Proxima 9200 LCD projector.

Ur convergence is dead.Must know how to solders?Must replaced 2 convergence ICS,and some or all it resistors.Tries Websites Tv repair, to buy a convergence kit to repair it ur self..The shop will cost u $300 for parts and labors.

Mar 11, 2010 | Televison & Video

1 Answer

Sony KP-53S75 blue convergence problem...

what about settings cool med warm ? did sumone chage those

Jan 18, 2008 | Sony KP-53S75 53" Rear Projection...

1 Answer

My picture has red ghosting. I tried to perform

This set has a bad convergence amp ic. This can be a complicated repair involving in depth convergence adjustment. You may be better off having a shop check it out for you. Thanks for using fixya.

Dec 12, 2009 | Philips 55PP9401 55" Rear Projection...

2 Answers

I have a ghosting problem everything else is good

Ur convergence it dead,must replaced convergence ics.resistors so..Buy a convergence kit,use what in that kit,u know how to solder right?Tries Tv repair, or Repair kits,for this convergence kits,most of the DLP tvs with this prob.

Oct 31, 2009 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Blue Ghosting Help Needed

Good Day, jhazelwd;
From what you say it sounds like the Convergence IC's have failed. Part number 267P150010, STK392-570, replace both IC's. They are on the middle board secured to a large heat sink.
Good Luck, big IRISH.

Aug 24, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Problem with HD feed from satellite receiver

I just had my HD DTV installed this weekend, you have to leave it on 480p. I too purchased my tv in 2002. Per DTV, its an older model and you have to stay with the 480p to get the best possible picture. I have to admit, don't know what the 1080i looks like, but 480p is showing me a very good picture. Best I have ever seen on my TV.

Jun 27, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Tosh widescreen ghosting vertical lines

there is no convergence adjust in a 32" tv. Convergence is done when there is more than 1 picture tube, ie; 50" projection sets have 3 tubes so convergence can go out. post the model number of your set and we can help more, BMW Rider

Dec 14, 2007 | Televison & Video

1 Answer

Samsung HC-P4752W Ghosting, seeing yellow, bowed lower left

What might be happening is that your convergence is out of adjustment. Before removing the Convergence ICs try to adjust your convergence either from the onscreen adjustment (see your owners manual) or by using a signal generator (if you have one). I am against this "lets start swapping parts out" craze that has become the norm because you never fix the cause of your problem just the symptoms. I would suggest trying to adjust the convergence first. Thank you, Shuttle83,

Oct 08, 2007 | Samsung HC-P4752W 47" Rear Projection...

2 Answers

Misaligned Convergence

Is anenvolved job to repair a convergence problem,the way to go about it is to locate the convergence amplifier IC's,one for each color(red green,blue)check for loose conections at the ic's legs,after resoldering all the legs see if an improvement is present if it gets better you will be able to adjust from the custumer controls,but if no improvement the Ic's will have to be replaced.Some units have a separete board were you can adjust convergence after replacing the Ic's and other units you have to access the service menu to be able to do the adjustments but just doing this adjustments can be very challeging even for a train technician,I would suggest you seek assistance from a servicer and get an estimate.

Oct 01, 2006 | Hitachi 50V500 50 in. HD-Ready LCD...

Not finding what you are looking for?
Sony Grand WEGA KF60DX100 60" Rear Projection Television Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts


Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

75017 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides