Question about Zyxel Prestige 660H Router

1 Answer

Router no internet access

Step 7 save settings to complete configiration when i press on save the settings it comes up saying (configuration genie ) user admin cannot log in hope you can help in some way

Posted by on

  • falkirk 23 Jan 04, 2008

    i got to step 7 with in mins cheers thanks for getting back to me

  • falkirk 23 Jan 04, 2008

    thanks mate y have been very helpfull to me had enough now going to watch tv thank you very much thanks will try tomorrow again thanks

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

Hi falkirk 23,

It sound like the unit is timing out the login. How long did it take to get to step 7?

Regards,
Spare head 2

Posted on Jan 04, 2008

  • Paul Griffith
    Paul Griffith Jan 04, 2008

    This link may be of some help.

    It not the same product but it does describe how to change the time out feature on the management login.

    Good luck,

    Spare head 2.

  • Paul Griffith
    Paul Griffith Jan 04, 2008

    Hi Falkirk 23,

    Just after post my last comment I found the document I was looking for...this link shows how to connect to the unit using a Telnet link. It not a nice interface, but you should be able to make the changes you need without any time out problems. It actually tells you how to disable that feature in order to upload new firmware.

    If all this fails then I'm out of suggestions.

    Spare head 2

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to reset netgear genie default user name from admin


Admin may not be a permissible username as many companies ship theirs set as admin. Try a different user name.

Oct 16, 2016 | NetGear Computers & Internet

1 Answer

How do a forgotten admin password on a xerox 7655


WorkCentre 7655 7665 7675 Online Support Solution Modify the Printer...
Solution : Modify the Printer's Administrator Password Using CentreWare Internet Services (CWIS) NOTE: This solution assumes the WorkCentre is configured and working properly on the network.
  1. From the computer, open an Internet browser window.
  2. Enter the IP address for the WorkCentre in theAddressfield, and then press [Enter] on the keyboard. The CentreWare Internet Services window will be displayed.
  3. Click on the [Properties] tab.

    NOTE:If the Login screen is displayed, enter the user name in theUser IDfield, and the password in thePasswordfield, and then click on the [Login] button.

    The default username is "admin" (case sensitive), and the default password is "1111". If it has been changed or forgotten, contact Support.
  4. Click on [Security] to expand the list of options.
  5. Select [Authentication Configuration].
  6. Click on the [Modify] button for Device System Administrator Password.
  7. Enter a new password in theNew Passwordfield.
  8. Retype the password in theRetype Passwordfield.
  9. Click on [Save]. This will be the new password to log into the Control Panel and CWIS.

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=143,E=0000000004704152929,K=9646,Sxi=4,Case=obj(3814)

Solution : Modify the Default Admin (Tools Mode) Password on the WorkCentre NOTE:The Admin (Tools Mode) password allows access to configure network and machine settings on the printer.Xerox recommends only changing the default Admin (Tools Mode) password if absolutely necessary. If the password has been changed from the default password (1111) and has been forgotten, a service call is required to reset the password.
To change the default Admin (Tools Mode) password:
  1. Press the [Log In / Out] button on the Control Panel. The Log In window will be displayed. See theRelated Itemsbelow for additional information regarding logging into the WorkCentre.
  2. Select [Security Settings] on the left side of the screen.
  3. Select [Authentication] from theGroupscolumn and then select [User / Administrator Accounts] from theFeaturescolumn. The User Administrator screen will be displayed.
  4. Select the [Account #] field, and then select account number 1 using the keypad on the Control Panel.
  5. Select the [Configure Account] button. The Configure User Accounts screen will be displayed.
  6. Press the [Clear C] button (several times, as required) on the Control Panel to clear the old password.
  7. Enter the new password using the keypad on the Control Panel.
  8. If necessary, place a check mark in the [System Administrator (Admin)] and [Account Administrator] check boxes, and then select [Save Account].
  9. Select [Close].
  10. Press the [Log In / Out] button on the Control Panel.
  11. Select [Logout] on the Touch Screen.

Apr 04, 2014 | Xerox WorkCentre M-24 Color Copier

1 Answer

Forgot ip address and password


To re-enable the Console access requires the SW2900 series to be reset to its default settings via the WEB INTERFACE
- Web Interface
- Device >Configuration >Initialize To change the Default User "ADMIN" password it is necessary to use the Console connection
-Console Interface
-Once the unit has successfully booted and the prompt presented
-Enter "password" (without "")
-Enter "admin" when the system prompts for User
-Press the "Enter" key when the system prompts for "Old Password" (the ADMIN password was reset by the Web Interface commands)
-Enter "" when the system prompts for the New Password (where "" is the new product ADMIN password)
-Enter "" when the system prompts to confirm the New Password In order to complete the configuration it is necessary to save the configuration via the WEB INTERFACE
-Web Interface
-Device > Configuration > Save
Symptom:
SW2900 Baseline Switch - Default console access disabled following password change
From the web interface, the default user "admin" password is changed and console access is disabled
Cause:
When applying the new password, by default the service-type is set to "telnet". When applied, the default "terminal" setting is removed thus disabling console access.

Apr 20, 2013 | 3Com Baseline Switch 2924-SFP Plus

1 Answer

Factory reset advent computer


You mean you want to reset in safe mode?

Well, here is how to use safe mode reset windows password :
Step 1. Press F8 when your Windows is booting. You will come to the Advanced Boot Options.
Step 2. Select Safe Mode with Command Prompt and press Enter.
Step 3. Enter safe mode with an available admin account. And a command prompt will appear.
Step 4. Type net user in command prompt and press Enter. It will show you all accounts on the Windows .
Step 5. Type net user Amber123 (Amber is the locked admin account's name and 123 is the new password. This depends on the setting of your computer) and press Enter. Now you have successfully created a new password on the locked admin account.
Step 6. Type shut down -r -t 00 and press Enter.
Step 7. The computer will reboot automatically and then you can log on Windows

Resource from: http://www.windowspasswordreset.net/article/windows-7-login-password-recovery.html

Jul 11, 2012 | Advent Computers & Internet

1 Answer

When i start it it says i need to be a adminastrator and then i do that and it still says it


this is an EASY problem

step 1: restart windows
step 2: while its booting up press F8 (if you see a black screen that says windows and a green loading bar apears you waited to long)
step 3: you will be prompted for how to start up_press ~start windows in safe mode~
step 4: type in administrator and log in (hopefully your settings allow you to type in the username if thats not set you have to go into the computer profile settings<explained later in this letter>)
-logging on in safe mode allows you to see if in fact you do have a master administrator-
step 5:if in fact a master admin is present restart windows normally and type in administrator and log on. and play your game there


also-------in your master administrator you should go to account setting and change settings privacy settings in the account you currently use

*how to change log in screen settings* log on on any administrator account go to control panel, user accounts, change the way users log on or log off, unlick welcome screen, save changes and restart your comuter.

-hopefully this help-

Jan 12, 2011 | Aspyr 1701 A.D. for Windows, Mac

2 Answers

I am trying to set up a wireless lan access point instuctions tell me to use ip address to bring up configuriation screen


"your router should be power on to perform this operations". Follow this steps bro. 2.reset your router configurations by pressing the reset button at the back of your router on the left side of the WAN port.3. when you are done pressing the reset button, wait 1minute to secure the configuration to roll back to its default configurations. 4.launch Browser "Mozilla Firefox". 5.in your locator bar or URL bar type "192.168.0.1 or 192.168.1.1" as a default ip address to log-in to your router at the top of the browser. 6.the authentication box will appear in your screen to input your router security log-in. 7.for user name just leave it blank. 8.for password type admin as a default password. 9.the router internal configuration setting will appear in your screen. 10.to enable wireless connection, select "wireless" at the upper menu list of the page. 11.set your SSID any name you want to name for your wireless connection then save. 12.for LAN you can just leave it on its default configuration.

Jul 08, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Cann't get my wireless router to work,don't understand how to config the router.


HI helock,

This is a step by step instructions:

Note: It is recommended that you configure the Wireless Router from a wired
computer.
1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter.
2. Enter the User Name and Password, and then click Log In. By default: User Name: admin Password: admin
3. The Wizard will automatically appear. Click Wizard if the Wizard does not automatically appear.
4. Click Next.
5. Select your Time Zone and then click Next.
6. Click Next. Note: Do not change default settings unless it is conflicting with your existing hardware.
7. The TEW-432BRP will attempt to auto detect your Internet connection. Follow the wizard instructions and continue on to step 9.
8. This screen will appear if the TEW-432BRP is unable to auto detect your Internet connection. Configure the settings based on information provided by your ISP.
9. Follow the wizard instructions to complete the configuration. Note: Each Internet Connection type may have different options.
10. Click Next
Note: It is recommended that you enable encryption on the wireless router. Please refer to the User Guide on the User's Guide CD-ROM for information on
setting up encryption on the wireless router. 11. Click Restart. 9. Follow the wizard instructions to complete the configuration. Note: Each Internet Connection
type may have different options.
11. Click Restart
12. Click Close.
13. Wait 30 seconds while the router reboots.
14. Verify that the following panel lights are on: LAN, WAN and WLAN.
15. Open up your browser and enter in a URL (e.g. www.trendnet.com) to verify that you have Internet connection.
Your configuration is now complete.

Good Luck,
And don't forget to leave a rating

Thanks

Mark

Sep 14, 2009 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

I can not remember my password so i can use my wi fi. So how do i reset my password. i can log on to the router can i change it in the settings?


Reset
Pressing the Reset button for 5 seconds restores the router to its original factory default settings.

Log in to the Router
This section will explain how to log in to your router using the following steps:
1. Launch your web browser.
2. Enter the URL http://192.168.1.1 in the address bar and press Enter.
A login screen like the one below will be displayed after you connect to the user interface.
Note: There are three account types, each requiring a different username and password.
• The user account provides limited access to certain configurations (username / password: user / user).
• The admin account can perform all functions
(username / password: admin / admin).
• The support account is for ISP technicians for maintenance purposes
(username / password: support / support).
Note: Passwords can be changed at any time.
3. Enter your user name and password, and then click OK to display the user interface.
Note: This manual has been prepared using the admin user name

Aug 20, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Zyxel prestige 660hw wireless router


Try using the password 1234.

If this fails look for a small hole in the unit, normally marked reset. Unit must be powered, press and hold the reset button for about 3-5 seconds, then release. Note:a tool may be required to reach the recessed button.

Then try the default login and password again.

Jan 04, 2008 | Zyxel Prestige 660H Router

Not finding what you are looking for?
Zyxel Prestige 660H Router Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

mark

Level 2 Expert

108 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...