Question about Jenn-Air 35 in. JEC9536ADS Electric Cooktop

2 Answers

JennAir Elec Cooktop Problem

My cooktop center burner (two elements) is behaving erratically. It seems to be all or nothing. What part do you think is causing this? Thanks.

Posted by on

  • Robert Kays Jun 26, 2013

    I have a simular ptoblem and I am thinking its the switch

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'VE HAD THE SAME PROBLEM WITH MY JENN AIRE. THE FIX IS REPLACING THE CONTROL KNOB. IT COSTS ABOUT $38. MARK ALL WIRE CONNECTIONS BEFORE REMOVING FROM OLD SWITCH. NEW SWITCH WILL BE SIMILAR BUT NOT IDENTICAL. YOU MUST ALSO USE THE JUMPER WIRE SUPPLIED WITH THE NEW SWITCH TO GET THE INDICATOR LITE TO WORK.

Posted on Mar 28, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 619 Answers

The selector knob having lose contact the elements are for full adjument , the wire connection are rust and corroded need to clean terminal of elements.

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Large burner elements ignite, and igniter spark fails to stop, then the burner shuts off as if ignition failed. Tiny central burner element does NOT light at any time. Apparently the safety cutoff...


There is a thermistor that must be in the flame area that needs to get hot. When hot it will turn the igniter off and keep the flame on. Check it's location and if it is in the flame then it needs to be replaced. not sure about the central flame problem. could be the switch.

Sep 20, 2010 | Gaggenau 36 in. KG 291 Dual (Electric &...

1 Answer

Burner light stays on


Hi,

This is caused by a faulty sensor that is located between the burner element and the top. To replace the faulty part you will need to uninstall the cooktop and remove the glass top. The sensor is a rod a little smaller than a pencil that you will see right on top of that burner.

If you choose not to replace the sensor it will not cause any issues other than you will have to live with that light constantly on and you will know when the top is hot for that element.

Jun 19, 2010 | Jenn-Air 30 in. CCE3401 Electric Cooktop

1 Answer

Double ring burner won't light up.


the outer element may be broken if the center one is the only one getting hot

Apr 07, 2010 | Electrolux 23 in. EHD6670P Electric...

1 Answer

We have a Jenn-air JGC8430ADS. The rear left


WE have a Jenn-Air JGC8430BDW gas cooktop. How do i replace a broken ignitor?

Feb 13, 2010 | Jenn-Air Cooktops

1 Answer

Burners of electric cooktop not getting red hot


Hello
Welcome,
Sounds like you have a bad surface heat controller.
Nothing to do but call a hands on tech to replace a part.


please remember to leave a rating before you sign off

Dec 11, 2008 | GE 30 in. JP340 Electric Cooktop

1 Answer

RCC3024 cooktop one burner wont heat


Hi again,

It would seem you posted anew.

For some reason I could not locate related literature for a RCC3024LD01,although there are for LB01, LQ01 and a LT01. Most of the components inthese models could be checked with the use of a continuity tester(multitester VOM/DVM). The idea is to check for continuity of eachcomponent. If we are to assume that the heating element as a likelysuspect, it is a matter of checking if the coil is continuous, that isno break anywhere in between. The test prods of the continuity testerwould be applied to the two (2) terminals of the heating element andthe tester should deflect/display how much is the resistance. Normalreading shouold be pretty low while no deflection/reading indicates anopen coil and therefore would require replacement.

These additional documents may be of help to you:
  1. exploded parts diagram;
  2. parts list.
Cheers.

Nov 11, 2008 | Whirlpool RCC3024 Electric Cooktop

1 Answer

Corning cooktop burner outage


The cooktop has to be examined for failure of the element or the switch. Some of the switches & some of the elements are still around. Have the elements checked for continunity. You will have to take it out of the counter and take the unit apart to do this.

Oct 18, 2008 | Verona 34 in. CTG536S Gas Cooktop

9 Answers

Ticking Sound of spark igniter persists


Our GE cook-top burner igniter has started ticking even when the oven is shut off. Even after cleaning the bottom of controls the ticking persists. Any suggestions? Thanks

Aug 27, 2007 | GE 36 in. JGP628 Gas Cooktop

Not finding what you are looking for?
Jenn-Air 35 in. JEC9536ADS Electric Cooktop Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

jason

Level 3 Expert

905 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...